Maxim Integrated MAX25256 H-Bridge Transformer Driver
https://www.electronics-lab.com/maxim-integrated-max25256-h-bridge-transformer-driver/
Maxim Integrated MAX25256 H-Bridge Transformer Driver provides a simple solution for making isolated power supplies up to 10W. The device drives a transformer’s primary coil with up to 300mA of current from a wide 8V to 36V direct current (DC) supply. The transformer’s secondary-to-primary winding ratio defines the output voltage, allowing the selection of virtually […]
SU-10A is Offline Speech Recognition Module Dedicated to Smart Applications
https://www.electronics-lab.com/su-10a-is-offline-speech-recognition-module-dedicated-to-smart-applications/
Nowadays, almost all applications and devices provide speech recognition functionality, this makes the device look smart and user-friendly. Cloud plays an important role in integrating such features in hardware systems. But it increases the cost due to additional wireless components and complexity in the architecture of the device. Hence, an offline speech recognition feature can […]
GPS/GNSS module receiver now features BLE/WiFi capabilities
https://www.electronics-lab.com/gps-gnss-module-receiver-now-features-ble-wifi-capabilities/
Septentrio announces an important addition to the open-source resources for their GPS/GNSS module receivers: mosaicTM wireless or simply mowi. It combines the Septentrio mosaic-X5 or mosaic-H module receiver with a dual-mode Bluetooth and integrated Wi-Fi from the well-known ESP32- WRover programmable module by Espressif Systems. It is an addition to the already existing mosaicHAT board, designed on the Raspberry Pi platform. The mowi project facilitates accurate and reliable GNSS positioning for robotic and autonomous devices, on a hardware level. Numerous engineers […]
315Mhz RF Remote Transmitter – Arduino Compatible
https://www.electronics-lab.com/project/315mhz-rf-remote-transmitter-arduino-compatible/
This is a two-channel RF Transmitter unit that consists of, Atmega328 microcontroller, 2 Tactile switches with pull-down resistors, a programming port, and a 315Mhz RF transmitter module. It is an Arduino compatible open-source project that can be used for many RF transmitter applications. It is advisable to use 1 Foot hook-up wire as Antenna to […]
315Mhz RF Remote Receiver with On Board Relay – Arduino Compatible
https://www.electronics-lab.com/project/315mhz-rf-remote-receiver-with-on-board-relay-arduino-compatible/
This is one channel RF Receiver with an onboard Relay. The project can be used for ON/OFF control of AC or DC loads using an RF remote. It’s an Arduino compatible Receiver project that consists of, Atmega328 microcontroller, 315MHz RF Receiver, 12v Relay, 5V Regulator, etc. Arduino Pins Receiver: D3 Relay, D11 Data in from […]
4 Channel 315Mhz RF Remote Transmitter – Arduino Compatible
https://www.electronics-lab.com/project/4-channel-315mhz-rf-remote-transmitter-arduino-compatible/
This is a 4 channel RF Transmitter unit that consists of an Atmega328 microcontroller, 4 x tactile switches with pull-down resistors, programming port, and 315Mhz RF transmitter module. It is Arduino compatible open-source project that can be used for many RF transmitter applications. It is advisable to use a 30cm hook-up wire as an antenna […]
Analog Style VU Meter on OLED Display – Arduino Compatible
https://www.electronics-lab.com/project/analog-style-vu-meter-on-oled-display-arduino-compatible/
This is an analog-style VU meter on a 0.96″ OLED Display. The project has a 0.96″ OLED display, Atmega328 Microcontroller, 3.5 mm audio EP socket for audio signal input. This Arduino compatible hardware can be program using Arduino IDE. Operating Supply 5V DC. Specifications Operating Supply: 5V DC 0.96″ OLED display Arduino Compatible PCB dimensions: […]
AWS IoT Core solution for ultra-low-power Wi-Fi cloud connectivity
https://www.electronics-lab.com/aws-iot-core-solution-for-ultra-low-power-wi-fi-cloud-connectivity/
InnoPhase, a fabless semiconductor company specializing in extreme low power wireless IoT solutions, announces the availability of a qualified Amazon Web Services (AWS) Internet of Things (IoT) Core solution for ultra-low power Wi-Fi cloud connectivity. In addition, it unveils a demonstration Smart Home Skill for Amazon Alexa targeted at home automation product designs. The solutions […]
Fujitsu Semiconductor FRAM (Ferroelectric Random Access Memory)
https://www.electronics-lab.com/fujitsu-semiconductor-fram-ferroelectric-random-access-memory/
Fujitsu Semiconductor FRAM (Ferroelectric Random Access Memory) is a non-volatile memory featuring fast writing speed operation, high read/write endurance and low power consumption. These features make FRAM ideal for applications requiring continuous data logging, real-time recording of three-dimensional position information, and data protection from sudden power outages. Fujitsu Semiconductor FRAM is offered in serial (SPI and […]
GENIATECH’S “XPI-IMX8MM” SBC RUNS LINUX ON i.MX8M Mini AND SELLS FOR $90
https://www.electronics-lab.com/geniatechs-xpi-imx8mm-sbc-runs-linux-on-i-mx8m-mini-and-sells-for-90/
Tech Giant, Geniatech, has launched a $90 “XPI-iMX8MM” Single Board Computer! The XPI-iMX8MM runs Linux on an i.MX8M Mini and is equipped with 1GB to 4GB RAM, 8GB to 128GB eMMC, and 40-pin GPIO. Geniatech’s XPI-iMX8MM is a Raspberry Pi sized SBC that has NXP’s 1.8GHz and quad-A53 i.MX8M Mini. It is the latest release, […]