Texas Instruments TMUX6219 Single Channel 2:1 (SPDT) Switch
https://www.electronics-lab.com/texas-instruments-tmux6219-single-channel-21-spdt-switch/
Texas Instruments TMUX6219 Single Channel 2:1 (SPDT) Switch is a complementary metal-oxide semiconductor (CMOS) switch in a single channel, 2:1 (SPDT) configuration. The device works with single supply (4.5V to 36V), dual supplies (±4.5V to ±18V), or asymmetric supplies (such as VDD = 8V, VSS = –12V). The TMUX6219 supports bidirectional analog and digital signals […]
Elektor Project: Wi-Fi for LoRa Switch
https://www.electronics-lab.com/elektor-project-wi-fi-for-lora-switch/
Clemens Valens @ Elektor Labs writes: We published a remote-controlled switch in the March/April 2020 edition of Elektor magazine. It had state feedback and communicated using LoRa. Because it was housed in a waterproof IP66 enclosure, it was suitable for outdoor use. It was also a modular project with the relay and power circuitry on […]
Analog Devices Inc. ADPD188BI Integrated Optical Module
https://www.electronics-lab.com/analog-devices-inc-adpd188bi-integrated-optical-module/
Analog Devices Inc. ADPD188BI Integrated Optical Module is a complete photometric system for smoke detection using optical dual wavelength technology. The module integrates a highly efficient photometric front end, two light emitting diodes (LEDs), and two photodiodes (PDs). The module is housed in a custom package to prevent light from going from the LED to the photodiode without entering […]
Würth Elektronik WSEN-HIDS Humidity Sensor
https://www.electronics-lab.com/wurth-elektronik-wsen-hids-humidity-sensor/
Würth Elektronik WSEN-HIDS Humidity Sensor utilizes a calibrated and temperature-compensated digital output with low energy requirement to measure humidity and temperature with long-term stability. The WSEN-HIDS humidity sensor is based on advanced micro-electro-mechanical systems (MEMS) technology and is only 2mm x 2mm x 0.9mm in size. This sensor features an integrated analog-to-digital converter and temperature […]
Analog Devices CN0537 Reference Design for UL-217 Smoke Detector
https://www.electronics-lab.com/analog-devices-cn0537-reference-design-for-ul-217-smoke-detector/
Analog Devices CN0537 Reference Design for UL-217 Smoke Detector is designed to demonstrate the use of the ADPD188BI Integrated Optical Module in a smoke/fire detection application. The ADPD188BI optical module is a complete photometric system specifically designed for smoke detection applications. Using the ADPD188BI in place of traditional, discrete smoke detector circuits greatly simplifies the design as the […]
LCDduino – Arduino Compatible 16X2 LCD module
https://www.electronics-lab.com/lcdduino-arduino-compatible-16x2-lcd-module/
The LCDduino board enables users to create many applications/projects that require a 16×2 LCD display and Arduino. The board has the exact size of 16×2 LCD and can be installed on the backside of the LCD. This is a low-cost solution that has onboard Arduino + LCD so no extra Arduino Nano or Arduino board […]
4 Channel Analog Video Distribution Amplifier
https://www.electronics-lab.com/4-channel-analog-video-distribution-amplifier/
The project presented here is a low-cost video distribution amplifier capable of driving up to four video lines. The amplifier is configured with a non-inverting gain of 2. The input video source is terminated in 75 Ohms and is applied to the high impedance non-inverting input. Each output line is connected to the op-amp’s output […]
3 Channel Analog Video Splitter with Video Amplifier
https://www.electronics-lab.com/3-channel-analog-video-splitter-with-video-amplifier/
If you need to drive multiple video gadgets or monitors from a single video signal source then this board is the right choice for you. This is a 3-channel video splitter with an amplifier and the circuit is built using discrete components. Q2 and Q1 act as a signal amplifier, Q3 act as output driver, […]
16 High Power LEDs Knight Rider Light – Arduino Compatible
https://www.electronics-lab.com/project/16-high-power-leds-knight-rider-light-arduino-compatible/
This is a Knight Rider LED Light and it is one of the best Arduino projects for beginners. This board drives 16 high-power LEDs to turn them ON one by one sequentially. This is an open-source Arduino compatible project that contains 16 high current MOSFETs, Atmega328 microcontroller, 5V regulator etc. The gate of IRLR7843 MOSFETs […]
High Accuracy Adjustable Overvoltage and Overcurrent Protectors using MAX17561
https://www.electronics-lab.com/project/high-accuracy-adjustable-overvoltage-and-overcurrent-protectors-using-max17561/
If you need safe power to run your project, then this circuit is a possible solution for you. This project provides protection to your system device against over-current, over-voltage, under-voltage, thermal overload, and reverse current flow control to the system device. Basically, this project can play a key role between the power supply and the […]