Arduino & Raspberry Projects

Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors
project
Filter by Categories
AI / ML
Analog
Arduino
Audio
Automotive
Basic Electronics
Business
Cables & Connectors
Comm and Networking
Components
Consumer Electronics
Control
Data Centers
Digital ICs
Displays
EDA Tools
Electronics-Lab
Embedded and Edge
FPGA
General Electronics
High Voltage
ICs
Industrial
Interface
IoT
Led
Memory
Microcontrollers
Miscellaneous
Motor
Navigation
Optoelectronics
Passives
PCBs
Photovoltaic
Power
Power supply
Processors
Raspberry Pi
RF / Wireless
Robotics
Semiconductors
Sensors
SoC / SiP
Software
SoM / CoM
Technology
Test & Measurement
Test/Measurements
Tools
Uncategorized
USB
LilyGO TTGO T5-4.7 E-Paper Weather Station

LilyGO TTGO T5-4.7 E-Paper Weather Station

The LILYGO T5 4.7 inch E-Paper ESP32 Development Board is an exciting 4.7″ e-paper display integrated with an ESP32 WiFi/Bluetooth module.

11 comments Tested
Mini Robot Controller Using Infra-Red Remote for Small and Medium Size Robot

Mini Robot Controller Using Infra-Red Remote for Small and Medium Size Robot

The Robot Controller is a very compact solution for controlling small and medium size robots using an Infrared remote.

0 comments Tested
2.5A Bipolar Stepper Driver with Micro-Stepping, Current and Decay Control – Arduino Compatible

2.5A Bipolar Stepper Driver with Micro-Stepping, Current and Decay Control – Arduino Compatible

This is an Arduino compatible board that contains an Atmega328 microcontroller and Bipolar Stepper Motor Driver chip STK682-010.

0 comments Tested
Arduino 4-Digit 0.5″ Common Cathode 7 Segment Display Module

Arduino 4-Digit 0.5″ Common Cathode 7 Segment Display Module

This project will help you to easily develop an Arduino compatible project that requires 4 x -7Segment 0.5″ displays.

0 comments Tested
Arduino 3-Digit 0.5″ Common Cathode 7 Segment Display Module

Arduino 3-Digit 0.5″ Common Cathode 7 Segment Display Module

This project will help you to easily develop an Arduino compatible project that requires 3 x 7-Segment 0.5″ displays.

0 comments Tested
Arduino 2-Digit 0.5″ Common Cathode 7 Segment Display Module

Arduino 2-Digit 0.5″ Common Cathode 7 Segment Display Module

This is an Arduino compatible board for creating 2 Digit Display projects.

1 comment Tested
3 Channel Capacitive Touch Sensor with I2C

3 Channel Capacitive Touch Sensor with I2C

The project described here is a 3 channel capacitive touch sensor based on CAP1203 chip from Microchip which is a multiple-channel capacitive touch sensor controller.

1 comment Tested
Radio Remote Control LED Dimmer Using NRF24L01 – Arduino Compatible

Radio Remote Control LED Dimmer Using NRF24L01 – Arduino Compatible

This is an easy-to-make LED dimmer using RF remote control.

0 comments Tested
315Mhz RF Remote Transmitter – Arduino Compatible

315Mhz RF Remote Transmitter – Arduino Compatible

This is a two-channel RF Transmitter unit that consists of, Atmega328 microcontroller, 2 Tactile switches with pull-down resistors, a programming port, and a 315Mhz RF transmitter module.

1 comment Tested
315Mhz RF Remote Receiver with On Board Relay – Arduino Compatible

315Mhz RF Remote Receiver with On Board Relay – Arduino Compatible

This is one channel RF Receiver with an onboard Relay.

0 comments Tested
4 Channel 315Mhz RF Remote Transmitter – Arduino Compatible

4 Channel 315Mhz RF Remote Transmitter – Arduino Compatible

This is a 4 channel RF Transmitter unit that consists of an Atmega328 microcontroller, 4 x tactile switches with pull-down resistors, programming port, and 315Mhz RF transmitter module.

0 comments Tested
Analog Style VU Meter on OLED Display – Arduino Compatible

Analog Style VU Meter on OLED Display – Arduino Compatible

This is an analog-style VU meter on a 0.96″ OLED Display.

2 comments Tested