Arduino & Raspberry Projects
DC Motor Speed, Direction and Brake Control with NRF24L01 RF Module – Arduino Compatible
This is Arduino compatible hardware that can control a single DC motor speed, direction, and brake using an RF remote control.
Single Joystick Remote Control Transmitter using NRF24L01 – Arduino Compatible
This is an Arduino compatible open-source hardware that includes 1 x joystick, NRF24L01 RF module, Atmega328D microcontroller, 3.3V regulator, power LED, function LED, and other required components.
Dual Joystick RF Remote Transmitter with NRF24L01 RF module – 2 Joystick Control
This is an Arduino compatible open-source hardware that includes 2 x Joysticks, NRF24L01 RF module, Atmega328 microcontroller, 3.3V regulator, power LED, function LED, Arduino programming connector, and other required components.
8 Channel RC Servo Driver Over RF Link using NRF24L01 RF Module – Arduino Compatible
This is an easy-to-build open-source Arduino compatible board that enables driving 8 RC servos over NRF24L01 RF Link.
4 Channel RF Remote Transmitter using nRF24L01- Arduino Compatible
This is an open-source Arduino compatible board that enables you to build a 4 channel RF remote control.
Sound to Colour Light Effects – Arduino Compatible
This is a fun-loving project based on the Arduino platform.
Precision Thermocouple Amplifier (Thermocouple to Digital Converter with Linearization – SPI Interface)
This precision thermocouple sensor module performs cold-junction compensation and digitizes the signal from any type of thermocouple.
Joystick Controlled 2 x RC Servo motors – Arduino Compatible
This project enables easy control of 2 RC servo motors using a thumb joystick.
Humidity Meter Using OLED Display – Arduino Compatible
This is an easy to build, very compact, and low profile Arduino compatible platform to build a humidity meter/Gauge using a 0.96Inch OLED display.
Automatic LED Stairway Lighting – Arduino Compatible
This creative idea is suitable for a stairway with 16 stairs, each stair can have a 12V LED.
Two Channel Smart Low-Side Power Switch for Inductive, Resistive and Capacitive Loads – Arduino Shield
The project presented here enables users to switch all kinds of resistive, inductive and capacitive loads, limited by clamping energy (EAS) and maximum current requirement.
PIR Motion Sensor LED Ceiling Light – Arduino Compatible
This motion sensor LED ceiling light board has been designed using 4 white LEDs each of 1-3W, PIR sensor module, Atmega328 microcontroller, low ohm IRLR7843 MOSFET, and few other components.