Projects Projects
Sound to RC Servo Driver v2.0 – Arduino Compatible
The project presented here is made for applications such as Animatronics, Puppeteer, sound-responsive toys, and robotics.
Continuous Conduction Mode Pre-Converters Module for Power Factor Controller
This compact module shown here is a Continuous Conduction Mode (CCM) Power Factor Correction Step up Pre-Converter.
Precision Thermocouple Amplifiers with Cold Junction Compensation – Temperature Range −25°C to +400°C
This Thermocouple Amplifier project provides a simple, low-cost solution for measuring thermocouple temperature.
Universal Input AC/DC Switching Buck Regulator – 85V -265V AC Input – 5V/150mA DC Output
The project presented here is a universal input AC/DC switching buck regulator with ultra-low standby power that is capable of delivering up to 2.5W output power.
Magnet Based Rotary/Linear Encoder Module with Quadrature Output
This sensor module is a simple solution to build a magnet-based rotary encoder.
Stepper Motor Based Rotary Encoder with Clock and Up/Down Direction Signal Output
This project enables the users to use a stepper motor as a rotary encoder for position control and Up/Down direction control.
Low-Cost Boost Converter 3.3V Input – 5V Output at 250mA
This is a low-cost boost converter that converts a 3.3V input to 5V at 250mA load current.
50V – 5A DC Brush Motor Driver – High Performance, High Reliability
This is a powerful yet small-size and low-profile brushed DC motor drive system, with key features like adjustable constant current control, direction control, brake controls, Alert output, PWM for speed control, etc.
Variable Over-Current Detection Load Switch
This over-current latch load switch provides over-current protection, thermal shutdown protection, soft-start function, and low power OFF function.
55V – 3A Half-Bridge Power Driver Module
This Half-bridge module provides current measurement and regulation features for various loads.
Step Up DC-DC Converter 12V Output – 5V Input
This high-performance, fixed frequency, current-mode PWM step-up DC/DC converter efficiently produces 12V from input voltages between 3.6V to 5.5V.
PWM to Voltage Converter – PWM to Voltage Output DAC
The project presented here is a dual 12-bit PWM-to-voltage output DAC with high accuracy.