Projects Projects
16 High Power LEDs Knight Rider Light – Arduino Compatible
This is a Knight Rider LED Light and it is one of the best Arduino projects for beginners.
High Accuracy Adjustable Overvoltage and Overcurrent Protectors using MAX17561
If you need safe power to run your project, then this circuit is a possible solution for you.
6-Channel Capacitive Touch Sensor Module
The module described here is a 6-channel capacitive touch sensor.
LCDduino – Arduino Compatible 16×2 LCD module
The LCDduino board enables users to create many applications/projects that require a 16×2 LCD display and Arduino.
4 Channel Analog Video Distribution Amplifier
The project presented here is a low-cost video distribution amplifier capable of driving up to four video lines.
3 Channel Analog Video Splitter with Video Amplifier
If you need to drive multiple video gadgets or monitors from a single video signal source then this board is the right choice for you.
4 Tactile Switch Breakout Board
This breadboard-friendly board breaks out all 4 tactile switch signals and includes pullup resistors configured so that the outputs read low or high when configured common VCC or GND.
Arduino Nano- Switching ON/OFF Appliances Using Infra-Red Remote (Two Channel)
The project presented here is a two-channel infrared remote ON/OFF switch that can be used to control home appliances, Lights, Fans, Water Pumps, Aquarium pumps, Ovens, Heaters, etc.
60V Input – 5V @ 50mA Output High Voltage Fixed Output Regulator
This is a high voltage regulator project that provides 5V regulated output with a load capacity of 50mA from input supply 10V to 60V.
H-Bridge Motor Driver with Integrated Current Sense and Regulation using DRV8874
In past, we have published many brushed dc motor driver boards for various projects and usually, they have some sort of limitations, as some of them...
42V Input – 3.3V @ 2A Output High Voltage Step Down Regulator
The project described here is a high voltage step-down regulator based on A4447 general-purpose buck converter chip from Allegro Semiconductor.
1Khz to 20Mhz Low Power Oscillator
This is a precision, low power oscillator that occupies very little space.