Shrike – A Low-cost FPGA board with RP2040 MCU, Renesas ForgeFPGA and open-source tools
https://www.electronics-lab.com/shrike-a-low-cost-fpga-board-with-rp2040-mcu-renesas-forgefpga-and-open-source-tools/
The Shrike is a compact, low-cost, open-source FPGA development board designed by an Indian company, Vicharak, for educational, experimental, and embedded development. It combines a Renesas ForgeFPGA SLG47910V with a Raspberry Pi RP2040 microcontroller, thanks to a six-bit high-speed bridge. The development board is breadboard-friendly and gets powered/programmed via USB Type-C. The board also offers […]
Waveshare ESP32-P4 Smart 86 Box Features WiFi 6, Ethernet, and touchscreen, fits into 86×86 mm junction box
https://www.electronics-lab.com/waveshare-esp32-p4-smart-86-box-features-wifi-6-ethernet-and-touchscreen-fits-into-86x86-mm-junction-box/
Waveshare’s ESP32-P4 Smart 86 Box is a touchscreen controller designed for Smart Home and Industrial IoT applications, with a compact 86×86 mm form factor that fits standard junction boxes. The device is available in two variants – the ESP32-P4-WIFI6-Touch-LCD-4B with a 4-inch 720×720 touchscreen, ESP32-P4 module, MIPI CSI camera connector, and 28-pin GPIO header; and […]
Milk-V Jupiter NX RISC-V AI SoM offers Jetson Nano pin-compatibility with Ubuntu and Fedora support
https://www.electronics-lab.com/milk-v-jupiter-nx-risc-v-ai-som-offers-jetson-nano-pin-compatibility-with-ubuntu-and-fedora-support/
Milk-V has introduced the Jupiter NX, a compact, high-performance AI system-on-module (SoM) designed as a RISC-V-based alternative to the NVIDIA Jetson Nano pin compatibility. Powered by the SpacemiT K1/M1 SoC, it features an octa-core X60 RISC-V CPU compliant with RVA22 and RVV1.0 standards, delivering up to 2.0 TOPS of AI computing power. The module supports […]
Pimoroni Presto is 4-inch Desktop Touch Display Development Board with RP2350 MCU and WiFi, RGB LEDs, Qwiic Expansion and More
https://www.electronics-lab.com/pimoroni-presto-is-4-inch-desktop-touch-display-development-board-with-rp2350-mcu-and-wifi-rgb-leds-qwiic-expansion-and-more/
The Pimoroni Presto is a compact 4-inch wireless desktop touch display development board built around the Raspberry Pi RP2350 MCU, which uses the Raspberry Pi RM2 wireless module, for both WiFi 4 and Bluetooth connectivity. Designed for desktop use, it features a square 480×480 capacitive touchscreen, 8MB PSRAM, 16MB QSPI flash, a microSD card slot, […]
Luckfox Nova Embedded Development Board Features Rockchip RK3308B SoC with 8-Channel Audio and PoE/Wi-Fi Options
https://www.electronics-lab.com/luckfox-nova-embedded-development-board-features-rockchip-rk3308b-soc-with-8-channel-audio-and-poe-wi-fi-options/
The Luckfox Nova is an embedded development board powered by the Rockchip RK3308B processor. This SoC features a 64-bit quad-core ARM Cortex-A35 CPU running at up to 1.3GHz, designed for smart voice interaction, audio signal processing, and multimedia applications. It integrates a high-performance Audio Codec and Voice Activity Detection (VAD) module for low-power voice wake-up […]
Luckfox Lyra Ultra and Lyra Ultra W: Rockchip RK3506B Linux embedded system with 8GB eMMC Storage and Linux Compatibility
https://www.electronics-lab.com/luckfox-lyra-ultra-and-lyra-ultra-w-rockchip-rk3506b-linux-embedded-system-with-8gb-emmc-storage-and-linux-compatibility/
The Luckfox Lyra Ultra is a Linux-based micro development board powered by the Rockchip RK3506B processor, designed for efficient embedded system development. It supports DDR2, DDR3, and DDR3L memory interfaces, allowing flexible memory expansion. The board is well-suited for multimedia processing and network communication. It is equipped with multiple high-speed interfaces, including MIPI DSI, RMII, DDR, and USB. It […]
SAPPHIRE Unveils EDGE+ VPR-5050 Mini-ITX embedded motherboard Combines AMD Ryzen V2748 and Versal AI Edge VE2302 for Industrial Applications
https://www.electronics-lab.com/sapphire-unveils-edge-vpr-5050-mini-itx-embedded-motherboard-combines-amd-ryzen-v2748-and-versal-ai-edge-ve2302-for-industrial-applications/
Sapphire Tech recently introduced the EDGE+ VPR-5050, a Mini-ITX embedded motherboard based on AMD Embedded+ Architecture. This architecture integrates an AMD Ryzen Embedded V2748 processor and an AMD Versal AI Edge VE2302 adaptive SoC. The motherboard is designed for real-time sensor data processing, AI inference, industrial networking, and multimedia applications. The Ryzen V2748 handles general […]
Orange Pi RV2 SBC Features Ky X1 RISC-V AI CPU with 2TOPS AI Compute, Dual M.2 PCIe, and Dual Gigabit Ethernet
https://www.electronics-lab.com/orange-pi-rv2-sbc-features-ky-x1-risc-v-ai-cpu-with-2tops-ai-compute-dual-m-2-pcie-and-dual-gigabit-ethernet/
Following the release of the Orange Pi RV RISC-V SBC at the 2024 Orange Pi Developer Conference, Orange Pi has introduced the Orange Pi RV2, a RISC-V development board powered by the Ky X1 octa-core AI CPU. Delivering 2TOPS of AI computing power, the RV2 is designed for machine learning, robotics, and embedded systems. The […]
RIMU is an open-source touchscreen input device designed for HID control, modular expansion, and more
https://www.electronics-lab.com/rimu-is-an-open-source-touchscreen-input-device-designed-for-hid-control-modular-expansion-and-more/
RIMU is an ESP32-S3-based open-source touchscreen input device with a modular design and a 4.3-inch touchscreen interface. Additionally, it features Wi-Fi, Bluetooth, an 8GB memory, a USB+OTG port, a 1020mAh battery, and a tripod mount, ensuring portability and versatility. The RIMU also supports HID keyboard emulation, allowing it to function as a customizable input device for […]
Pineboards Raspberry Pi CM4/CM5 carrier boards brings PoE+ and M.2 NVMe support to Raspberry Pi CM5
https://www.electronics-lab.com/pineboards-raspberry-pi-cm4-cm5-carrier-boards-brings-poe-and-m-2-nvme-support-to-raspberry-pi-cm5/
Pineboards has recently launched the Raspberry Pi CM4/CM5 carrier boards (Modulo4, Modulo5 Basic, and Modulo5 IO PoE+) designed to adapt Raspberry Pi Compute Modules (CM4 and CM5) to the Raspberry Pi’s form factor while maintaining compatibility with PCIe HATs, cases, and cooling solutions. The Modulo5 IO PoE+ variant integrates PoE+ for network-powered operation. These boards feature […]