Seeed Studio LoRa-E5 STM32WLE5JC LoRaWAN Module
https://www.electronics-lab.com/seeed-studio-lora-e5-stm32wle5jc-lorawan-module/
Seeed Studio LoRa-E5 STM32WLE5JC LoRaWAN Module is a low-cost, ultra-low power, extremely compact, and high-performance module. This module uses ST system-level package chip STM32WLE5JC, embedded high-performance LoRa® chip SX126X. The STM32WL module LoRa-E5 LoraWAN is embedded with Arm Cortex M4 ultra-low-power MCU and LoRa SX126X, thus supporting (G)FSK mode and LoRa. This module offers a 158dB link […]
Arduino Portenta Vision Shield LoRa for Computer Vision Applications
https://www.electronics-lab.com/arduino-portenta-vision-shield-lora-for-computer-vision-applications/
We saw the launch of Arduino Porenta H7 last year, it features programming in high-level languages and AI and at the same time, it performs low-latency operations on its customizable hardware. However, the board supported an inbuilt module dedicated to professional and industrial applications, apart from its popularity amongst the hobbyists. Arduino also launched a […]
STM32WLEx 32-Bit Wireless Long-Range MCUs
https://www.electronics-lab.com/stm32wlex-32-bit-wireless-long-range-mcus/
STMicroelectronics’ long-range wireless and ultra-low-power devices embed a powerful ultra-low-power LPWAN-compliant radio solution STMicroelectronics’ STM32WLE5/E4xx long-range wireless and ultra-low-power devices embed a powerful ultra-low-power LPWAN-compliant radio solution, enabling the LoRa® (available in STM32WLx5xx only), (G)FSK, (G)MSK, and BPSK modulations. These MCUs are compatible with standardized or proprietary protocols such as LoRaWAN®, Sigfox, W-MBUS, and more […]
MKR Windy – Arduino MKR inspired board with STM32WL LoRa SoC
https://www.electronics-lab.com/mkr-windy-arduino-mkr-inspired-board-with-stm32wl-lora-soc/
Just recently, we wrote about Midatronics’ MKR SharkyPro BLE, Zigbee, OpenThread development board that is based on STM32WB55 MCU in an Arduino MKR form factor. We are back with excitement to inform you that the company also has a similar looking MKR Windy board that follows the same Arduino MKR layout but is based on […]
STM32WLE5 Microcontrollers support LoRa RF protocol and other sub-1GHz modulation schemes
https://www.electronics-lab.com/stm32wle5-microcontrollers-support-lora-rf-protocol-and-other-sub-1ghz-modulation-schemes/
STMicroelectronics STM32WLE5 wireless SoC products combine LoRa® LPWAN and other power-efficient sub-1GHz radio communications capabilities with a low-power MCU in a single chip. With its low power consumption and small footprint, the STM32WLE5 enables the production of energy-efficient, compact, and lightweight new products for fast-growing industrial and IoT markets. The new 7mm x 7mm QFN48 […]
Kickstarter: Industrial 5G / 4G Raspberry Pi Shield
https://www.electronics-lab.com/kickstarter-industrial-5g-4g-raspberry-pi-shield/
As 5G emerges on the market, where smartphones and coverage is becoming more and more common, there is the need to provide us, makers, with the necessary tools to start building some interesting projects with 5G, so that the potential (that we see already) can be expanded even further and its potential seen on our […]
Armachat NANO, an Alternative Communications Device for Catastrophes
https://www.electronics-lab.com/armachat-nano-an-alternative-communications-device-for-catastrophes/
We have seen some alternatives in the past to provide an alternative to the complex communication stack, provided via the internet through social networks or the cellular communication that our cellphones have been allowing us to do for a long time. These devices are especially useful when the internet is down or in case of […]
Meet the RFL-Watch: LoRa-Based Text Communicator
https://www.electronics-lab.com/meet-the-rfl-watch-lora-based-text-communicator/
While adulations were still being showered on his work on the MORPHESP 240, Dr. Philippe Cadic (@Sulfroid on twitter), recently shared progress on another project called the RFL-Watch, via his twitter handle which is usually loaded with reports on the progress of his projects. Based on the RAK4260, the RFL-Watch is a wearable LoRa communicator […]
xTendLoRa mesh-capable LoRa data radio Supports AT commands & MODBUS
https://www.electronics-lab.com/xtendlora-mesh-capable-lora-data-radio-supports-at-commands-modbus/
A Crowdfund campaign is set to be launched soon for the XTendLoRa, which is a mesh-capable LoRa data radio with support for AT commands & MODBUS. “Whether you are designing an Internet of Things (IoT) product, constructing a smart home, rolling out a sensor network, developing a building automation solution, or just trying to make […]
PaperiNode, an Arduino-compatible flexible low power energy-harvesting LoRa-enabled electronic paper display
https://www.electronics-lab.com/paperinode-arduino-compatible-flexible-low-power-energy-harvesting-lora-enabled-electronic-paper-display/
Robert Poser has posted his project on GitHub called PaperiNode, which is a flexible, low power, energy-harvesting, LoRa-enabled, electronic paper display. PaperiNode is ideal for the Paperino (an easy to use micro EPD breakout-board for the Photon or other Arduino-compatible microcontrollers. The eInk-based ePaper display mimics the appearance of natural paper and is capable of […]