Exploring SparkFun NanoBeacon Board – IN100
https://www.electronics-lab.com/exploring-sparkfun-nanobeacon-board-in100/
With remarkable low power consumption features and little need for programming, the SparkFun NanoBeacon Board – IN100 and SparkFun NanoBeacon Lite Board – IN100 provide a 2.4 GHz wireless low energy beacon breakout. The IN100 NanoBeaco from InPlay is displayed on the board. The NanoBeacon Tool enables software-free module configuration, eliminating the need for complex […]
Reviewing URVE Board Pi powered by Rockchip RK3566
https://www.electronics-lab.com/reviewing-urve-board-pi-powered-by-rockchip-rk3566/
URVE Board Pi is a compact credit card-sized single-board computer (SBC) with a 1.8GHz processor, 2GB of RAM, eMMC, an M.2 connector, Gigabit Network, Wifi, and Bluetooth 4.2. It is possibly the complete all-in-one SBC. If you want to build a home NAS and store your files and photos at home, you need something like […]
The nanoCH32V003 is a RISC-V dev board available for $1.50
https://www.electronics-lab.com/the-nanoch32v003-is-a-risc-v-dev-board-available-for-1-50/
nanoCH32V003 is a development board that was created by MuseLab and is based on CH32V003F4U6, which was manufactured by QinHeng. On the board are a reset button, an LED, and a crystal oscillator that operates at 24 MHz. The 1-wire serial debug interface (SDI) is supported, and all of the general-purpose input/output (GPIO) pins are […]
Featuring T-Display-S3 with ESP32-S3 and 1.9 inch Color Display
https://www.electronics-lab.com/featuring-t-display-s3-with-esp32-s3-and-1-9-inch-color-display/
T-Display-S3 is a development board that has ESP32-S3 as the main control chip. It features a color LCD screen that is 1.9 inches in size and two buttons that may be programmed. The connectivity is made possible by the use of the I8080 interface. It also maintains the same design and layout as the T-Display. […]
AmpRipper 4000 is a New Battery supply Board for Raspberry Pi & Arduino
https://www.electronics-lab.com/ampripper-4000-is-a-new-battery-supply-board-for-raspberry-pi-arduino/
Kickstart Design is preparing to launch a campaign on Kickstarter for the AmpRipper 4000, their next-generation battery supply board for Raspberry Pi, Arduino, and other electronic projects, which is set to launch soon – boasting a significant upgrade from the AmpRipper 3000 design. In September 2021, the AmpRipper 3000 was unveiled, utilizing the Monolithic Power […]
EDATEC CM4 Sensing Computer For IoT & Data Acquisition applications
https://www.electronics-lab.com/edatec-cm4-sensing-computer-for-iot-data-acquisition-applications/
The Internet of Things (IoT) is changing the way we interact with the world around us by connecting devices and systems in ways that were never before possible. With the growth of IoT solutions, there is an increasing need for smart and reliable sensors to enable this new capability. CM4 Sensing IoT World by Raspberry […]
Taoglas Invisible Antenna Unlocks IoT Innovations with Covert Connectivity
https://www.electronics-lab.com/taoglas-invisible-antenna-unlocks-iot-innovations-with-covert-connectivity/
Taoglas’ new transparent flex antennas offer a clear alternative to opaque antennas for covert cellular, Wi-Fi, and GNSS connectivity in innovative IoT applications. The future of antennas is clear Taoglas®, a trusted provider of antennas and IoT components that helps solve complex engineering problems, announces three new invisible antennas supporting cellular, Wi-Fi, and GNSS technologies. […]
ESP32-MPY-Jama MicroPython IDE Programs ESP32 MCUs
https://www.electronics-lab.com/esp32-mpy-jama-micropython-ide-programs-esp32-mcus/
MPY-Jama, created by Jean-Christophe Bos, is a great tool for those looking for a balance between heavy and light IDEs that support MicroPython. MicroPython is an open-source interpreter that runs on embedded hardware, allowing programmers to write easy-to-understand programs for microcontrollers like Espressif’s ESP32 quickly. MPY-Jama has an IDE, a REPL terminal, Wi-Fi tools, and […]
Sierra Wireless Announces New 5G LPWA HL7900 Module Integrating Sony’s Altair ALT1350 Chipset
https://www.electronics-lab.com/sierra-wireless-announces-new-5g-lpwa-hl7900-module-integrating-sonys-altair-alt1350-chipset/
Powering next-gen LPWA solutions with an ultra-low power 5G cellular+ module for IoT Sierra Wireless, a subsidiary of Semtech Corporation and world leading IoT solutions provider, today announced its latest HL Series LPWA module, the 5G HL7900, for next-generation use cases needing ultra-low power, increased device longevity and support for 3GPP’s latest 5G standards. The […]
Debugging Pico using SWD and UART with the new Raspberry Pi Debug Probe, at just $12
https://www.electronics-lab.com/debugging-pico-using-swd-and-uart-with-the-new-raspberry-pi-debug-probe-at-just-12/
The Raspberry Pi Debug Probe is a comprehensive USB-to-debug kit that provides the necessary hardware for solderless, plug-and-play debugging. It is inspired by the trend where electronics enthusiasts used one Raspberry Pi Pico to debug programs running on another Pico board and features Raspberry Pi’s RP2040, a dual-core Arm Cortex-M0+ microcontroller with clever Programmable Input/Output […]