Ultra low Noise RF Voltage Regulator TPS7A94
https://www.electronics-lab.com/ultra-low-noise-rf-voltage-regulator-tps7a94/
Recently Texas Instruments unveils Ultra-low Noise RF Voltage Regulator TPS7A94. This device is a low noise 0.46μVrms, Low Dropout (LDO) voltage Regulator. It can provide output current up to 1A with only 200mV of maximum dropout. It can operate with a minimum of 1.7V to maximum 5.7V input and gives a maximum output voltage 5.5V […]
Melexis enhances 3D magnetic position sensors
https://www.electronics-lab.com/melexis-enhances-3d-magnetic-position-sensors/
Melexis delivers a cost-optimized family of 3D magnetic position sensors with performance enhancements for automotive applications. Melexis has expanded its portfolio of 3D magnetic position sensors with the introduction of the MLX9042x series. These sensors are designed for automotive applications that need to measure absolute position accurately in harsh and noisy environments over an extended […]
Buck converter adds adaptive power sharing
https://www.electronics-lab.com/buck-converter-adds-adaptive-power-sharing/
Silanna Semiconductor claims the industry’s first buck converter with intelligent adaptive power sharing for multi-port fast chargers. Silanna Semiconductor has claimed the first buck converter power IC to feature intelligent adaptive power sharing. The SZPL3002A buck converter with a built-in USB PD/FC port controller will significantly reduce component count to implement 65-W fast charger and […]
Infineon adds Shield2Go board for CO2 monitoring
https://www.electronics-lab.com/infineon-adds-shield2go-board-for-co2-monitoring/
Infineon launches its XENSIV PAS CO2 Shield2Go evaluation board for CO2 monitoring, which supports both Arduino and Raspberry Pi development. Infineon Technologies AG has launched the XENSIV PAS CO2 Shield2Go board for carbon dioxide (CO2) measurement. The evaluation board is suited for both air quality monitoring and demand-controlled ventilation for energy savings. The board is part of the Infineon Shield2Go portfolio featuring […]
i.MX 8M Mini/Nano System-on-Modules (SoMs)
https://www.electronics-lab.com/i-mx-8m-mini-nano-system-on-modules-soms/
Beacon EmbeddedWorks’ wireless SoM features NXP’s i.MX 8M mini processor and Wi-Fi 5 and Bluetooth® 4.2 connectivity Beacon EmbeddedWorks’ i.MX 8M Mini/Nano system-on modules (SoMs) can help customers get their product to market faster and reduce design risk. The multicore architecture of NXP’s i.MX 8M Mini/Nano applications processor provides the platform to develop a portfolio […]
Micsig SATO1004 handheld oscilloscope
https://www.electronics-lab.com/micsig-sato1004-handheld-oscilloscope/
Micsig’s SATO1004 is a four-channel automotive oscilloscope with a comprehensive list of pre-set vehicle-related tests. The instrument features 100MHz bandwidth, 1Gsample/s (in single channel mode), 32Mpoint memory and up to five hours of mobile use from its built-in battery, or continuous use from its 12V power adaptor. “SATO1004 is a professional vehicle testing tool for […]
Kneron KL720 AI SoCs
https://www.electronics-lab.com/kneron-kl720-ai-socs/
Kneron KL720 AI SoC (System on a Chip) offers an ideal balance of performance, power saving, and cost for hardware makers who are looking to benefit from on-device edge Artificial Intelligence (AI). Powered by Kneron’s Neural Processing Unit (NPU) that accelerates neural network models, the KL720 SoC makes possible endless AI applications for smart devices. The NPU […]
Move-X Cicerone LoRa®/GNSS Board
https://www.electronics-lab.com/move-x-cicerone-lora-gnss-board/
Move-X Cicerone LoRa®/GNSS Board is a high-performance, low-power, Arduino MKR-compatible development board based on the MAMWLE LoRa Module and the u-blox MAX-M10S GNSS Module. The Cicerone Board delivers best-in-class GNSS, long-range wireless connection, and high-performance MCU processing in a low-power solution for optimal battery life. The Cicerone Board allows users to build tracking applications worldwide with […]
Nordic Semi announces first Wi-Fi 6 chip
https://www.electronics-lab.com/nordic-semi-announces-first-wi-fi-6-chip/
Nordic Semiconductor has announced its entry into the Wi-Fi wireless IoT market with the launch of the nRF7002, an ultra-low power, dual-band Wi-Fi 6 companion IC. Nordic Semiconductor is now one of just a few companies offering all three of the world’s most popular wireless IoT technologies: Bluetooth, Wi-Fi, and cellular IoT. The nRF7002 is […]
Bluetooth LE based LCD messenger using STM32
https://www.electronics-lab.com/bluetooth-le-based-lcd-messenger-using-stm32/
The aim of this project is to send messages via Bluetooth using a web browser or smartphone to an LCD display that is connected to the STM32 board. 1. Introduction The project is based on STM32 Nucleo-144 which controls LCD display using BleuIO. For this project, we will need two BleuIO USB dongles, one connected to the Nucleo board […]