Projects Projects
Dual 2A Power Amplifier Module for TEC
This Dual 2A Power Amplifier module is a low-cost operational amplifier designed for driving a wide variety of loads while operating on low-voltage supplies.
Electronic DC Load using TLE2141
The circuit shown here is a low-cost electronic DC load designed to sink current from a power source.
9V @ 45mA Boost Converter Output with Input 2.1V to 5.5V
The project shown here is a boost converter that provides 9V DC output from 2.1V to 5.5V input.
3.3V-5A Output DC-DC Converter with 10 to 24V Input
The project published here is a synchronous step-down DC/DC converter based on the RT7258 chip.
21-Watt Universal AC LED Driver with Accurate Average-Mode Constant Current Control
The project presented here is an average current mode control LED driver operating in a constant off-time mode.
5V – 4A Buck Converter using NR110E
This powerful buck converter can efficiently produce 5 V@4A with an input voltage between 7V to 31V.
Raspberry Pi time-lapse Camera Setup
This tutorial will walk you through setting up your own Raspberry Pi time-lapse Camera setup from beginning to end.
Getting Started with TivaWare Launchpad
Program a 32-bit Tivaware Board (TM4C123x series) from Texas Instruments using Embedded C from scratch.
Node Red with Raspberry Pi Tutorial
Node-RED is a powerful open-source visual programming tool for building Internet of Things (IoT) applications.
LilyGO TTGO T5-4.7 E-Paper Weather Station
The LILYGO T5 4.7 inch E-Paper ESP32 Development Board is an exciting 4.7″ e-paper display integrated with an ESP32 WiFi/Bluetooth module.
Universal AC Voltage Step-Down Power Converter – 18V DC Output From 85-265V AC Input
The project described here is an off-line universal AC Voltage input step-down regulator that provides accurate constant voltage (CV) output, outstanding low standby power, high efficiency at light load, and excellent dynamic response based on non-isolated buck topology.
Reinforced Isolated Current-Sense Amplifier with Precision ±250-mV Input, Differential output & Integrated DC/DC Converter
This isolated single-supply bidirectional current sensing project can accurately measure load currents from –2A to 2A.