Projects Projects
4 Channel Analog Video Distribution Amplifier
The project presented here is a low-cost video distribution amplifier capable of driving up to four video lines.
3 Channel Analog Video Splitter with Video Amplifier
If you need to drive multiple video gadgets or monitors from a single video signal source then this board is the right choice for you.
4 Tactile Switch Breakout Board
This breadboard-friendly board breaks out all 4 tactile switch signals and includes pullup resistors configured so that the outputs read low or high when configured common VCC or GND.
Arduino Nano- Switching ON/OFF Appliances Using Infra-Red Remote (Two Channel)
The project presented here is a two-channel infrared remote ON/OFF switch that can be used to control home appliances, Lights, Fans, Water Pumps, Aquarium pumps, Ovens, Heaters, etc.
60V Input – 5V @ 50mA Output High Voltage Fixed Output Regulator
This is a high voltage regulator project that provides 5V regulated output with a load capacity of 50mA from input supply 10V to 60V.
H-Bridge Motor Driver with Integrated Current Sense and Regulation using DRV8874
In past, we have published many brushed dc motor driver boards for various projects and usually, they have some sort of limitations, as some of them...
42V Input – 3.3V @ 2A Output High Voltage Step Down Regulator
The project described here is a high voltage step-down regulator based on A4447 general-purpose buck converter chip from Allegro Semiconductor.
1Khz to 20Mhz Low Power Oscillator
This is a precision, low power oscillator that occupies very little space.
65V Input to 12Vdc Output – 1A synchronous buck DC/DC converter using LM5164
This is a step-down DC-DC converter mainly designed for application such as high-cell-count battery packs, power tools, garden tools and electric scooters, drones.
Temperature Controlled RGB LED Light Stick – Mood Light
The circuit presented here is a LED light stick which changes its color in respect with the room temperature.
LED Fading Effect / LED Strobe using 555
In general, generating an LED fade effect requires a microcontroller or another expensive circuit.
1.2V to 35V @ 3A Adjustable Step-down Regulator using LM2596
This is a highly efficient and compact project that is capable of driving a 3A load with excellent line and load regulation and adjustable output of 1.2V to 35V DC.