Projects Projects
Pulse Generator For Stepper Controller Using AD654
This stepper pulse generator project is an easy solution for stepper controller drive.
The Aurora Boxealis – A Color Sensing and Mirroring Project
Introduction Besides looking damned good on an otherwise bland and ordinary desk, this project is about more than just being attention grabbing eye candy.
16X2 LCD Shield with LMD18201 Motor Driver
LCD is very important part of many DIY and industrial projects.
Arduino Analog Thermometer With DS18b20 Module
Introduction Sometimes, it is necessary to add a temperature indicator into your projects.
High Voltage-Current Half Bridge Driver Using IR2153 & IGBT
This is an IGBT based half bridge board that has been designed for multiple applications, like Induction Heater driver, Tesla coil driver, DC-DC converters, SMPS etc.
Intelligent Power Module (IPM) Board for Brushless Motors
Intelligent Power Module (IPM) board has been designed using FSBS5CH60 IC from Fairchild, which provides a fully-featured, high-performance inverter output stage for AC Induction, BLDC, and PMSM motors.
5V to Dual 12V Step Up DC-DC Converter Using LM2588-ADJ
Lots of op-amp based circuits require dual (symmetrical) power supply.
MP3 Module & RTC DS1307 Shield For 28/40 Pin PIC Development Board
MP3 Shield has been designed for various applications related to voice record and play using MP3 module with memory card storage, this shield can be used as standalone mode or Digital mode by serial interface.
3.5A Unipolar Stepper Motor Driver
Compact Unipolar stepper motor driver can drive unipolar motor up to 3.5A and supply range 10 To 50V DC.
Real Time Clock On 20×4 I2C LCD Display with Arduino
Introduction Sometimes it may be necessary to use a display while making a hardware project, but the size and the type of the display may vary according to the application.
5V @ 3A Power Supply using TPS54302
This circuit is based on TPS54302, a high efficient buck converter from Texas instrument.
Sound to RC Servo Driver
New Version: A new version of the Sound to RC Servo is available “Sound to RC Servo Driver v2.0 – Arduino Compatible” This project is designed for Animatronics and Puppeteer applications, however, it can be used in other applications like sound-responsive toys, robots, etc.