Projects Projects
Ingition Coil Driver
The project presented here is an Ignition coil driver featuring FAN1100-F085 ignition gate driver chip and IGBT.
Isolated Power Supply with 24V Input and Dual 15V Output
This isolated power supply features the SN6507 chip, a push-pull isolation transformer driver, which provides a reliable and efficient power conversion solution.
Teensy 4.1 Expansion Board with DC-DC Converter
The Teensy 4.1 expansion I/O shield is designed to simplify the connection process, saving you time and effort in your project development.
Teensy 4 Expansion Board with DC-DC Converter
The Teensy 4 expansion I/O shield is designed to simplify the connection process, saving you time and effort in your project development.
434Mhz Arduino Wireless Analog Sensor Data Receiver
This Wireless Analog Sensor Receiver is a complementary component to the Wireless Analog Sensor Transmitter, designed to receive and process data transmitted from the transmitter.
434Mhz Arduino Wireless Analog Sensor Transmitter
This Wireless Analog Sensor project is a cost-effective solution for transmitting live data and enabling continuous monitoring, logging, and plotting sensor measurements.
1200V Inverter Module for 3 Phase Motors up to 2KW
The power board described here is designed for motor applications, featuring the 6ED2230S12T gate driver IC and FP15R12W1T4 IPM power module from Infineon.
Simple Photovoltaic Charger – Solar Power module with Back-Up
A simple photovoltaic (PV) to Li-On battery charger project is described here.
Stereo 2-Vrms Line Driver and Headphone Amplifier
This is a 2Vrms Pop-Free stereo line driver with a stereo headphone driver designed to allow the removal of the output DC-blocking capacitors for reduced component count and cost.
3.3V Automotive Step-Down Regulator – Low-Iq, Dual-Mode
This is a Dual Mode regulator intended for Automotive, battery-connected applications that operate with up to a 36V input supply.
Stereo Audio Digital-to-Analog Converter Module
This is a breakout board for the IC PCM1795 stereo digital-to-analog converter (DAC), The DAC module accepts pulse code modulation (PCM) and direct stream digital (DSD) audio data formats, thus providing an easy interface to audio digital signal processors (DSPs) and decoder chips which will convert digital signal into analog signal.
Multi Output Step-Down Converter – Input 18-24V and Output 3.3V, 5V, 12V
This is a fantastic project for makers, offering multiple output options of 3.3V, 5V, and 12V, with an input of 18-24V DC.