PD Micro – Breadboard-Friendly USB-C Power Supply Based on Arduino
https://www.electronics-lab.com/pd-micro-breadboard-friendly-usb-c-power-supply-based-on-arduino/
We have all been there. Everytime we start adding new peripherals, sensors and actuators to our projects, we eventually will reach a point where the 3.3 and 5 V voltages from the microcontroller (when they are available) are not enough, either because we require more current than what the MCU pins can deliver, or we […]
TinyDecoder – Cool IR Receiver and NEC Decoder with Arduino
https://www.electronics-lab.com/tinydecoder-cool-ir-receiver-and-nec-decoder-with-arduino/
Infrared has been around for a long while. It has proven to be reliable enough so that basically almost everything remote and short range, that came before home automation was cool enough to be considered a thing, and battled its place fairly with RF technologies, so it deserves some love and affection from us. Besides […]
Arduino Nano 33 IoT-based NTP World Clock
https://www.electronics-lab.com/arduino-nano-33-iot-based-ntp-world-clock/
Arduino Nano 33 IoT can be used to enhance existing devices and creating new ones to include IoT and to design network-specific applications. This article focuses on one of such applications which uses Network Time Protocol by clock synchronization between systems all over the world. It is necessary to know more about Arduino Nano 33 […]
ON Semiconductor NCN51xxASGEVB KNX Evaluation Boards
https://www.electronics-lab.com/on-semiconductor-ncn51xxasgevb-knx-evaluation-boards/
ON Semiconductor NCN51xxASGEVB evaluation boards are Arduino-compatible shields that enable rapid prototyping with a microcontroller of choice. These evaluation boards incorporate all the external components necessary for operating the transceivers. The NCN51xASGEVB boards come in three variants such as the NCN5110ASGEVB, NCN5121ASGEVB, and NCN5130ASGEVB. The NCN51xx series of KNX transceivers handle the low-level communication necessary to […]
RGBDuino UNO and RGBDuino RGB Shield: Add Light and Questionable Arduino PCB
https://www.electronics-lab.com/rgbduino-uno-and-rgbduino-rgb-shield-add-light-and-questionable-arduino-pcb/
Now, from my writing experience here at eLab, I have dealt with some funny and interesting concepts, but nothing quite like what I am about to show you. But bear with me here, aside from the questionably looking electronics you are about to glance, there might be something useful to light up your Arduino projects. […]
24 LEDs Bargraph Display using 74HC595 Shift Register
https://www.electronics-lab.com/24-leds-bargraph-display-using-74hc595-shift-register/
This project is built for fun-loving users to create a 24 LED bar-graph for light effects that can be driven using Arduino or another microcontroller. The project consists of 74HC595 x 3 chips, and 24 LEDs of Red, Green, Blue, and Yellow colors. The project helps the user to experiment with serial-in and parallel-output shift […]
Arduino-compatible shields quicken KNX communication designs
https://www.electronics-lab.com/arduino-compatible-shields-quicken-knx-communication-designs/
RS Components is now stocking the Arduino-compatible NCN5100ASGEVB evaluation boards from ON Semiconductor. These evaluation kits include all the components necessary to create smart home and building automation systems based on KNX communication technology. The kits are suitable for use with a broad range of MCUs, and can be plugged directly into existing development platforms. […]
Low-Cost Room Thermometer Using 16×2 LCD and Atmega328
https://www.electronics-lab.com/low-cost-room-thermometer-using-16x2-lcd-and-atmega328/
This is an easy to build small size and low-cost room thermometer. The project consists of LM35 analog temperature sensor, 16×2 LCD, and an Atmega328 chip. This compact board is Arduino compatible and provided with an onboard connector for Boot-Loader burning and Arduino IDE programming. Board also has 2 additional connectors for analog input and […]
Smart RGB LED Light Stick – Arduino Compatible
https://www.electronics-lab.com/smart-rgb-led-light-stick-arduino-compatible/
This is a Smart LED light stick that contains 20 x WS2812B single wire addressable full colors RGB LEDs and Atmega328 microcontroller. These full colors chainable intelligent RGB LEDs work with a single wire addressable protocol thus they require a micro-controller to generate the pulse train to control the colors and flashing effects. Refer to […]
New Sensor Kit by Arduino and Seeed powers-up sensor projects with ease
https://www.electronics-lab.com/new-sensor-kit-by-arduino-and-seeed-powers-up-sensor-projects-with-ease/
Enter the world of electronics with Seeed Grove sensors, actuators and Arduino all in one Open-source hardware, software, and content platform, Arduino has collaborated with Chinese DIY electronics company, Seeed to create the all-new Arduino Sensor Kit. The kit brings the power of Seeed’s Grove sensors to Arduino’s most popular board – the Arduino UNO […]