Piskey Atto is a Tiny Arduino Compatible Board with USB
https://www.electronics-lab.com/piskey-atto-tiny-arduino-compatible-board-usb/
Designed with makers in mind, this cost-effective Piskey Atto handles most of the issues developers face with some of the available development boards. “We recently started creating DIY projects on our YouTube channel and we ran into a similar issue, time and again. Most of the sensors and modules that we commonly use are already […]
Sound Sensor with onboard Relay Arduino Nano Shield
https://www.electronics-lab.com/sound-sensor-onboard-relay-arduino-nano-shield/
This sound sensor with Relay driver shield for Arduino Nano can be used to develop sound-activated ON/OFF switch or other projects that require sound senor. LM358 op-amp is used as the amplifier, 1st op-amp amplifies the microphone signal, and 2nd op-amp works as a half-bridge rectifier that converts AC signal into a DC voltage. This […]
Arduino-Based SSD uses an ATmega8 & 8 EEPROM chips
https://www.electronics-lab.com/arduino-based-ssd-uses-atmega8-8-eeprom-chips/
“Now, instead of using an SD card to store configuration files, I can simply send commands via the UART interface to the SSD from an external board and store/retrieve data without the extra code overhead.” SD cards are used for storing information when logging data or retrieving files but with microcontrollers that have shorter RAM […]
Seeed Launches an innovative All-in-one Grove Beginner Kit for Arduino
https://www.electronics-lab.com/seeed-launches-innovative-one-grove-beginner-kit-arduino/
Open-Source Hardware manufacturing super-power, Seeed Studio recently announced the launch of a new All-in-one Arduino Kit for Beginners. Designed for both learners and educators, the Grove beginner kit for Arduino aims to make learning Arduino programming fun and simple. According to Seeed, the new kit was designed to help beginners overcome some of the challenges […]
BalBot: a Self-Balancing Robot
https://www.electronics-lab.com/balbot-self-balancing-robot/
In contrast to technology and science, in everyday life, a distinction is rarely made between regulation and control. A mere control system does not monitor the output value, meaning that it can change due to external disturbances. A simple and typical example is the speed control of a DC motor by PWM. Here, the speed […]
Elektor Article: Artificial Intelligence for Beginners (Part 1)
https://www.electronics-lab.com/elektor-article-artificial-intelligence-beginners-part-1/
This time we have the perfect, hands-on entry to Artificial Intelligence. Using the €30 (!) Maixduino board with its fitted camera, LCD panel and… Arduino IDE (!) we present a flying start into AI with demos including one that can recognize 1000 different objects. The use of artificial intelligence is on the increase in many […]
750mA Constant Current LED Driver Arduino Nano Shield
https://www.electronics-lab.com/750ma-constant-current-led-driver-arduino-nano-shield/
This small constant current LED driver Nano shield has been designed using CAT4104 IC from ON semiconductor. Its 4 channel LED driver. The board has provision to mount 20 SMD 1206 LEDs. The LED can be RED, GREEN, BLUE and WHITE. Reduce the number of LED to 12 if White LEDs are used, as white […]
Beetle – The Smallest Arduino for $7.9
https://www.electronics-lab.com/beetle-smallest-arduino-7-9/
Beetle is one of the smallest Arduino Leonardo board. It derives its core notion from minimalism without compromising functionality. It comes with Atmel AtMega32u4 ( datasheet) @16MHz clock time and has expanded amounts of interfaces: 10 digital pins, 5 analog pins, and 4 pwn pins. To further make it user-friendly, it is compatible with Micro […]
PD Micro – A Pro Micro with USB-C Power Delivery
https://www.electronics-lab.com/pd-micro-pro-micro-usb-c-power-delivery/
PD Micro is the first Arduino-compatible board with USB-C power delivery. The pins are compatible with Pro micro. PD Micro allows you to control high voltage easily from USB-C Power delivery. It’s useful for applications that require voltage higher than 5V – like motor control or a high-power LED. New USB-C Power Delivery Library PD […]
Seeed Launches ODYSSEY-X86J4105 – An Expandable x86 Mini Computer with Arduino support
https://www.electronics-lab.com/seeed-launches-odyssey-x86j4105-expandable-x86-mini-computer-arduino-support/
Seeed Studio has launched the ODYSSEY Single Board Computer with an Arduino Coprocessor onboard, and an Intel Gemini Lake SoC is arguably the most expandable x86 Mini Computer available with an enormous amount of peripherals arsenal. Odyssey comes as a family of SBCs (Single Board Computer) with the primary goal of deploying edge computing applications. […]