Wemos launched its latest creation: the Wemos Lolin C3 Pico ESP32-C3 board
https://www.electronics-lab.com/wemos-launched-its-latest-creation-the-wemos-lolin-c3-pico-esp32-c3-board/
Wemos, a manufacturer of affordable and easy-to-use electronic boards, has launched its latest creation: the Wemos Lolin C3 Pico ESP32-C3 board. The new board is a successor to the Lolin C3 Mini, with additional features like battery charging support. The Lolin C3 Pico is a small, compact board that measures only 25mm x 25mm, making […]
RoomSense IQ is a smart sensor that can detect human activity using millimeter-wave Radar
https://www.electronics-lab.com/roomsense-iq-is-a-smart-sensor-that-can-detect-human-activity-using-millimeter-wave-radar/
RoomSense IQ is a smart sensor that can detect motion, temperature, humidity, and light levels. It is designed to be placed in any room in your home, and it can help you keep track of the temperature, humidity, and light levels in each room. It can also help you monitor the activity in your home […]
Featuring T-Display-S3 with ESP32-S3 and 1.9 inch Color Display
https://www.electronics-lab.com/featuring-t-display-s3-with-esp32-s3-and-1-9-inch-color-display/
T-Display-S3 is a development board that has ESP32-S3 as the main control chip. It features a color LCD screen that is 1.9 inches in size and two buttons that may be programmed. The connectivity is made possible by the use of the I8080 interface. It also maintains the same design and layout as the T-Display. […]
ESP32-MPY-Jama MicroPython IDE Programs ESP32 MCUs
https://www.electronics-lab.com/esp32-mpy-jama-micropython-ide-programs-esp32-mcus/
MPY-Jama, created by Jean-Christophe Bos, is a great tool for those looking for a balance between heavy and light IDEs that support MicroPython. MicroPython is an open-source interpreter that runs on embedded hardware, allowing programmers to write easy-to-understand programs for microcontrollers like Espressif’s ESP32 quickly. MPY-Jama has an IDE, a REPL terminal, Wi-Fi tools, and […]
Compact ESP32-S3 SoC board with Cat-M & NB-IoT Support by LILYGO
https://www.electronics-lab.com/compact-esp32-s3-soc-board-with-cat-m-nb-iot-support-by-lilygo/
A compact embedded board from LILYGO with Wi-Fi/BL5.0 and the SIM7080G module for CAT-M and NB-IoT connectivity has been launched recently. The SIM7080G is an SMT-type Multi-Band CAT-M and NB-IoT module. It is easy to add on to because it has many interfaces, such as UART, GPIO, PCM, SPI, I2C, etc. The module gives the […]
Tiny ESP32-S3 IoT controller M5Stack ATOMS3 Lite
https://www.electronics-lab.com/tiny-esp32-s3-iot-controller-m5stack-atoms3-lite/
ATOMS3 Lite is the newest addition to the M5Stack Atom series of wireless programmable controllers. It is based on the ESP32-S3 IoT platform. It is possible to use it as an Internet of Things node, a microcontroller, or even in wearables. It also has a wide range of other applications, but it does not include […]
Smart Wi-Fi Scale Geared Up With ESP32
https://www.electronics-lab.com/smart-wi-fi-scale-geared-up-with-esp32/
A wide range of uses is possible for low-cost kitchen scales. They are typically quite basic devices without features like wireless connectivity. Still, Liore Shai made the decision to change that by adding Wi-Fi functionality to an Amazon Basics scale which cost about just $10 shipped at the time of purchase using an ESP32 board. […]
Smart plug ESP32 OpenMQTTGateway serving as an BLE MQTT gateway and a Power meter
https://www.electronics-lab.com/smart-plug-esp32-openmqttgateway-serving-as-an-ble-mqtt-gateway-and-a-power-meter/
In order to function as a BLE MQ Telemetry Transport (MQTT) gateway and power meter compatible with Home Assistant, Homebridge, OpenHAB, DomoticZ, FHEM, Jeedom, NodeRed, AWS, and any MQTT-compatible IoT or Smart Home system, the Theengs Plug ESP32 smart plug runs OpenMQTTGateway firmware. Theengs open-source tools Even though the Matter standard should make it easier […]
433 MHz is alive! Communicating with 433 MHz sensors using an ESP32 board and LoRa module.
https://www.electronics-lab.com/433-mhz-is-alive-communicating-with-433-mhz-sensors-using-an-esp32-board-and-lora-module/
While Matter, Bluetooth, Zigbee, and Zwave may get all the press these days, 433 MHz was the simple yet reliable technology that our sensors and devices relied on before they became popular. Given the wide range of applications for the 433 MHz, generalizations regarding the technology are likely to be oversimplified. Numerous household and automotive […]
ePulse Feather – Low Power ESP32 development board
https://www.electronics-lab.com/epulse-feather-low-power-esp32-development-board/
Low power ESP32 development board. The ePulse from ThingPulse is the perfect companion for your battery-powered IoT projects. Optimized for Low Power Consumption ePulse Feather, the low power ESP32 development board, is optimized for applications where a low sleep current and LiPo battery support is required. The VIN pin accepts voltages between 3V3 and 6V. […]