u-blox MAX-M10N GNSS Module Adds LEAP Mode and Flash-Upgradeable Firmware
https://www.electronics-lab.com/u-blox-max-m10n-gnss-module-adds-leap-mode-and-flash-upgradeable-firmware/
The MAX-M10N brings ultra-low-power GNSS with LEAP mode, RTCM support, and flash-upgradeable firmware to wearables, trackers, and battery-powered IoT devices.
Kyocera Debuts “Ultra-Compact, Ultra-Low Voltage” Clock Oscillator Series
https://www.electronics-lab.com/kyocera-debuts-ultra-compact-ultra-low-voltage-clock-oscillator-series/
The KC1210A series clock oscillators feature a compact design of 1.25 mm × 1.05 mm × 0.5 mm and a low-voltage operation of 0.9 V, offering reduced power consumption for high-density electronic designs.
Littelfuse Rolls Out Energy-Efficient Magnetic Sensing With TMR Switches
https://www.electronics-lab.com/littelfuse-rolls-out-energy-efficient-magnetic-sensing-with-tmr-switches/
The new omnipolar and bipolar switches integrate TMR and CMOS technology, enabling ultra-low current consumption and high magnetic sensitivity for applications ranging from smart meters to wearables.
E-peas Introduces Dual-Source Energy Harvesting PMIC for Smart Power Management
https://www.electronics-lab.com/e-peas-introduces-dual-source-energy-harvesting-pmic-for-smart-power-management/
The new AEM13921 is a dual-input energy harvesting power management IC featuring independent boost converters with over 90% efficiency, ultra-low cold start, and adaptive power management.
Ambiq Announces Ultra-Low-Power SoCs for High Performance in Edge Designs
https://www.electronics-lab.com/ambiq-announces-ultra-low-power-socs-for-high-performance-in-edge-designs/
The Apollo510 Lite series of ultra-low-power SoCs is designed for energy efficiency, wireless connectivity, and fast performance in edge devices, including wearables, smart home systems, and IoT sensors.
Renesas’ Second-Generation RA8 Series Pushes MCU Performance to 1 GHz
https://www.electronics-lab.com/renesas-second-generation-ra8-series-pushes-mcu-performance-to-1-ghz/
The new Arm Cortex-M85-powered RA8M2 and RA8D2 MCUs offer embedded MRAM for fast, high-endurance storage and dedicated DSP/ML acceleration, targeting high-performance IoT and HMI applications.
Smart Glasses Get an Upgrade With TDK’s Custom-Built, Motion-Tracking IMU
https://www.electronics-lab.com/smart-glasses-get-an-upgrade-with-tdks-custom-built-motion-tracking-imu/
The SmartMotion ICM-45685 sensing solution is designed for high-precision, ultra-low power motion tracking and on-chip image stabilization for AI and augmented reality-enabled smart glasses and eyewear.
Rohm Introduces Compact, Low-Power CMOS Op Amp for Battery-Powered Devices
https://www.electronics-lab.com/rohm-introduces-compact-low-power-cmos-operational-amplifier-for-battery-powered-devices/
The TLR1901GXZ is an ultra-small CMOS operational amplifier with a low, 160 nA operating circuit current, ideal for battery-powered sensing applications.
Ambiq Introduces Ultra-Low Power Wireless SoC for Edge AI Applications
https://www.electronics-lab.com/ambiq-introduces-ultra-low-power-wireless-soc-for-edge-ai-applications/
Ambiq’s new Apollo510B system-on-chip (SoC) features a 48 MHz network coprocessor and Bluetooth Low Energy 5.4 radio for wireless, low-power connectivity in wearable technology, industrial automation, and beyond.
Hirose Electric Releases Compact Multi-Power Hybrid FPC-to-Board Connector
https://www.electronics-lab.com/hirose-electric-releases-compact-multi-power-hybrid-fpc-to-board-connector/
The new BK11 series features a compact design, armoured housing, and configurable power contacts, giving designers flexible, space-saving multi-power hybrid connection in smartphones and wearables.