Projects Projects
24V Boost Converter from 4.5V to 20V Input
The project presented here is a boost converter with 24V output from 4.5V to 20V DC Input.
Stepdown DC-DC Converter with Current Limit
The step-down DC-DC Converter project presented here provides 3.3V @ 1A output from an input range of 8V to 36V DC.
Step Up DC-DC Converter – 24V/10mA Output from 12V DC Input – Compatible to TO220 LDO
The project demonstrated here is a small-size solution, high-efficiency, low-cost, and low-EMI step-up DC/DC module for LDO regulator replacement.
2 Channel Smart Dual Coil Latching Relay Board – 2 Channel Bistable Relay Module
This is a Smart Dual Coil Latching Relay that can control the ON/OFF power of a device by applying a short voltage pulse to Input 1 and Input 2.
Wideband, High-Output-Current – Single Ended-to-Differential Line Drivers with Enable
This is a Line Driver project.
Voice Echo Processor Module – Delay Device for Sound Effects, Echo, Reverb
The voice echo or digital delay sound effects project presented here is suitable for applications such as Karaoke, multimedia, musical instrument effects, electronics toys, animatronics, etc.
Ultra-High-Speed, Low-Distortion – Differential-to-Single-Ended Line Receivers with Enable
The project presented here is a differential line receiver that offers unparalleled high-speed, low-distortion performance and is ideally suited for digital, video, and RF signal-processing applications.
Over Current Trip Switch – Over Current Shutdown Relay
The project presented here is an over-current trip switch.
Mono 2W – Switch-Mode (Class D) Audio Power Amplifier
This is a compact size, mono, switch-mode (Class-D) audio power amplifier intended for multimedia and general-purpose high-power applications.
4 Channel High-Speed – Robust-EMC Reinforced Digital Isolators
The project described here is a high-performance, quad-channel digital isolator with a 5000VRMS isolation rating as per UL1577.
Really Large Size 7 Segment Display with SPI Interface – 8 Channel SPI Relay Board
This is an SPI Interface multichannel relay board for high voltage AC or low voltage DC loads.
Under Voltage Lockout Relay – Latching Voltage Monitor
This project prevents/disconnects the load when an under-voltage condition occurs.