Projects Projects
HV Nixie DC-DC Switching Power Supply
Nixie tubes need about ~180Vdc to light up and thus on most devices, a DC-DC converter is needed.
USBASP Firmware update guide
The USBASP programmer is an important tool/accessory for embedded systems engineers/ firmware developers.
Programming the ATtiny10 with Platform.io IDE
The ATtiny10 is a high-performance, low-power Microchip 8-bit AVR RISC-based microcontroller which combines 1KB ISP flash memory, 32B SRAM, 4x...
Sensirion Gas/Temp/Humidity Sensor Kit
While browsing through the internet to check up on the latest air quality sensors for use in a project I am working on, I stumbled across the Sensirion environmental sensor shield.
7-segment Mini Clock using PIC16F628A and DS1307 RTC
This is a minimal and small clock based on PIC16F628A microcontroller and DS1307 RTC IC.
Using the New ATtiny Processors with Arduino IDE (ATtiny412, ATTiny1614, ATtiny3216, ATtiny1616, ATtiny3217)
While the Arduino series of development boards have ease-of-use features that have made them a darling of the community, there are several situations where using them is not an advisable course of action for a project.
Build your own 0-24V/3A Lab Power Supply with current limit
I have always believed that one of the best things about being a maker, is the ability to build your own tools, and we have covered the development of several tools like this in the past.
3V To 5V Boost DC-DC Converter using MAX711
The circuit shown here is a compact and high-efficiency boost converter that has been designed for hand-held equipment.
2.7A PWM Valve/Solenoid Driver Arduino Nano Shield
This Arduino shield helps to drive various loads like a solenoid, valve, motor, inductive actuator, heater, and bulb.
Sound Sensor with onboard Relay Arduino Nano Shield
This sound sensor with Relay driver shield for Arduino Nano can be used to develop sound-activated ON/OFF switch or other projects that require sound senor.
0-6V @ 1.5A Adjustable Power Supply With Current Limit using LT3081
This is a simple power supply that provides an adjustable output voltage with an adjustable current limit.
PiNAS: Raspberry Pi Based Network Attached Storage (NAS)
Network Attached Storage (NAS) are high-capacity storage devices that are connected to a local home or office network to provide everyone (with designated “clearance”) on that network with access to the files on the drive without the need to plug into it directly.