Monolithic Power Systems (MPS) MP3362 Boost LED Driver
https://www.electronics-lab.com/monolithic-power-systems-mps-mp3362-boost-led-driver/
Monolithic Power Systems (MPS) MP3362 Boost LED Driver is a fixed-frequency converter for low-current and high-current boost applications. The driver features a low 0.2V feedback voltage for higher efficiency in white LED driver applications. The MP3362 regulates the output voltage up to 36V with an efficiency as high as 95%. Current mode regulation and external compensation […]
Ultra-Small Chip Level DC/DC Converter to Meet Isolation Protection Requirements
https://www.electronics-lab.com/ultra-small-chip-level-dc-dc-converter-to-meet-isolation-protection-requirements/
The new chip-level DC/DC converter, B0505ST16-W5 from Mornsun is designed to meet automotive and medical application requirements. This fixed input 0.5W DC/DC converter is the SMD device with reinforced 5KVAC high isolation and trimable output voltages of 3.3V, 3.7V, 5V, 5.4V available in a miniature SOIC16 package, with control ON/OFF pin that has a wide operating temperature […]
Lantronix releases Open-Q 5165RB System-on-Module for Edge Robotics Applications
https://www.electronics-lab.com/lantronix-releases-open-q-5165rb-system-on-module-for-edge-robotics-applications/
Lantronix has recently launched a system-on-module and its integrated development board based on Qualcomm QRB5165 System-on-Chip running Ubuntu Linux OS. The Open-Q 5165RB system-on-module has been designed with a compact form factor of just 29×50 mm for edge robotics applications. Along with the public launch comes another hardware on the same Qualcomm system-on-chip, but a […]
Würth Elektronik Thetis-I with Evaluation Kit
https://www.electronics-lab.com/wurth-elektronik-thetis-i-with-evaluation-kit/
Radio Module and Test Option for the Wirepas IoT Network Protocol Würth Elektronik launches Thetis-I, a ready-to-use radio module for Wirepas mesh networks. Thetis-I is the perfect solution for IoT device manufacturers. Networks with technology from Wirepas, the Finnish software provider, are self-healing and freely scalable. Each device with a Thetis-I radio module can also […]
Fibocom LTE-A Pro Module Series NL952 Accelerates the Digital Journey with T-Mobile Certificate
https://www.electronics-lab.com/fibocom-lte-a-pro-module-series-nl952-accelerates-the-digital-journey-with-t-mobile-certificate/
Fibocom, a global leading provider of IoT (Internet of Things) wireless solutions and wireless communication modules, announces that its LTE Advanced Pro module NL952-NA has been successfully certified by T-Mobile. The module is now qualified to provide wireless connection services under T-Mobile’s network, which further expands the product’s application coverage over the US market. Based […]
Epishine signs distribution agreement with Farnell to enable light energy harvesting within electronic design
https://www.electronics-lab.com/epishine-signs-distribution-agreement-with-farnell-to-enable-light-energy-harvesting-within-electronic-design/
Epishine’s new-to-market printed organic solar cells and development kits remove the need for batteries reducing the impact on the environment. The innovative Swedish manufacturer of printed organic solar cells and development kits Epishine has signed a new franchise agreement with Farnell, an Avnet Company and global distributor of electronic components, products, and solutions. The new-to-market […]
230V AC Input – 12V Output DC Converter, Non-Isolated Buck Converter
https://www.electronics-lab.com/project/230v-ac-input-12v-output-dc-converter-non-isolated-buck-converter/
The project described here outputs 12V DC voltage from the input of 230V AC. The output current is up to 100mA. The project is based on BM2P129TF chip which is PWM method DC/DC converter with a built-in 650V MOSFET. BM2P129TF contributes to low power consumption by built-in a 650V starting circuit. Built-in current detection resistor […]
Prodigy PGY-LA-EMBD Logic Analyzer Hands-on Review
https://www.electronics-lab.com/prodigy-pgy-la-embd-logic-analyzer-hands-on-review/
Since its introduction in 1973 by Hewlett Packard, Logic Analyzers have been one of the most important tools in an engineer’s toolkit. Logic Analyzers enable us to easily debug digital logic signals by capturing the data and plotting it in a time-view format. They serve a similar purpose as an oscilloscope, which is a tool […]
Open Source Unsurv Offline Features ESP32, GNSS
https://www.electronics-lab.com/open-source-unsurv-offline-features-esp32-gnss/
A campaign has been launched on Crowd supply for Unsurv, which is an offline privacy-friendly, small, lightweight PCB (43 mm x 32 mm) loaded with an ESP32, GNSS reciever and NFC capabilities. It functions by using a combination of OpenStreetMap data on the SD card, and a custom Android app, enabling you to gather GNSS […]
Open Source Kryptor FPGA with Dedicated Hardware Security Module
https://www.electronics-lab.com/open-source-kryptor-fpga-with-dedicated-hardware-security-module/
Kryptor FPGA has been around in the pre-launch phase for over two years. After a significant amount of time and wait, the one-chip hardware security module Kryptor FPGA has launched for crowdfunding on Crowdsupply with the goal of $13,000. This compact FPGA hardware security module brings ease and flexibility for deployment in the IoT space. […]