Elecrow 5.79-Inch Low-Power E-paper Display Review
https://www.electronics-lab.com/elecrow-5-79-inch-low-power-e-paper-display-review-sharp-monochrome-screen-with-deep-sleep-partial-refresh-and-sunlight-readability/
This CrowPanel ESP32 5.79” electronic paper HMI display has a sharp monochrome screen with deep sleep, partial refresh, and sunlight readability.
New Hybrid ReDriver ICs Restore High-Speed Video Signals
https://www.electronics-lab.com/new-hybrid-redriver-ics-restore-high-speed-video-signals/
Supporting up to 12 Gbps for HDMI 2.1, these ReDrivers from Diodes Inc. enable 8K video and simplify design with intelligent power management and a flexible hybrid operating mode.
ESP32-C3 Upgrade Board Adds ESPHome Support to AC Infinity Airtap Fans
https://www.electronics-lab.com/esp32-c3-upgrade-board-adds-esphome-support-to-ac-infinity-airtap-fans/
The AC Infinity Airtap T4/T6 is a drop-in replacement board for the AC Infinity Airtap Fans. It works with both 3-button and 4-button models and adds Wi-Fi and smart home support using ESPHome, so you can control your fan from your phone or Home Assistant.
New 6-Axis IMU Solution for Optical Image Stabilization
https://www.electronics-lab.com/new-6-axis-imu-solution-for-optical-image-stabilization/
TDK’s new family of high-performance 6-axis IMUs, the ICM-536xx, is designed to expand the adoption of optical image stabilization (OIS) while still offering high data rates in a compact form.
NXP’s New Battery ICs Boost EV and ESS Performance
https://www.electronics-lab.com/nxps-new-battery-ics-boost-ev-and-ess-performance/
The new BMx7318/7518 series 18-channel Li-ion battery controllers for EVs and energy storage feature dedicated ADCs for each cell, enhancing accuracy, safety, and efficiency.
Waveshare PCIe HAT+ Adds NVMe, Dual 2.5GbE, USB 3.2 to Raspberry Pi 5
https://www.electronics-lab.com/waveshare-pcie-hat-adds-nvme-dual-2-5gbe-usb-3-2-to-raspberry-pi-5/
Waveshare has recently released the PCIe TO M.2 USB ETH HAT+, an all-in-one expansion board with PCIe to USB 3.2 Gen1, 2.5G Ethernet, and M.2 NVMe HAT+ support. It uses the Pi 5’s PCIe interface to deliver high-speed I/O and storage in a compact HAT+ form factor.
AutoML for Embedded: A New Tool for Resource-Constrained Devices
https://www.electronics-lab.com/automl-for-embedded-a-new-tool-for-resource-constrained-devices/
Analog Devices’ new open-source AutoML tool integrates with CodeFusion Studio, automating machine learning model creation for resource-constrained microcontrollers.
Microchip Debuts Disaggregated NVMe RAID Accelerator
https://www.electronics-lab.com/microchip-debuts-disaggregated-nvme-raid-accelerator/
The Adaptec SmartRAID 4300 series is a new family of NVMe RAID storage accelerators with disaggregated architecture, separating software and hardware for enhanced performance.
Waveshare 21.5-inch FHD Capacitive Touch Monitor Supports Toughened Glass, Optical Bonding, and Optional Pi5/CM4
https://www.electronics-lab.com/waveshare-21-5-inch-fhd-capacitive-touch-monitor-supports-toughened-glass-optical-bonding-and-optional-pi5-cm4/
Waveshare’s 21.5-inch FHD Capacitive Touch Monitor is a high-resolution 1080×1920 display, built for Raspberry Pi, Jetson Nano, and Windows PCs. It features 10-point touch, an HDMI interface, and a toughened glass panel with optical bonding, making it suitable for commercial, industrial, and medical applications.
Broadcom Aims to Solve the Distributed AI Networking Challenge
https://www.electronics-lab.com/broadcom-aims-to-solve-the-distributed-ai-networking-challenge/
The new Jericho4 router uses 3.2T HyperPorts and deep buffering to enable lossless RoCE performance, connecting massive XPU clusters across facilities separated by over 100 km.