Projects Projects
Precision Digital Current and Power Monitor using INA260
This module is a digital-output monitor (INA260) that measures current, power, and voltage via an I2C/SMBus interface.
TMC429 Triple-Axis High-End Motion Controller with SPI Interface
This TMC429 Breakout Board is a versatile motion control solution that enables users to create sophisticated three-axis motion control systems.
Synchronous Boost Converter 12V Input to 24V Output @ 2A
This project is a synchronous boost converter based on the LM5122 IC.
Simple SMPS, 85-265VAC Input with Output 12VDC @ 750mA
This is a compact Switch-Mode Power Supply (SMPS) using the TNY266 chip for cost-effective solutions like power adapters and LED drivers.
Under/Over Voltage and Current Protection Switch
This simple project allows users to design an under-voltage, over-voltage, under-current, and over-current protection switch.
Step-Up DC-DC Converter – 9V Output @ 500mA
This project uses the LM2700 step-up DC/DC converter to efficiently generate a 9V output from a single Li-Ion battery.
Isolated Analog Input Module v2
This Isolated Analog Input module is designed for industrial applications, optically isolating 0−5V sensor signals to output 0−3.3V for microcontrollers.
Isolated Potentiometer and Switch Module using LOC110
This Isolated Potentiometer Module provides isolated analog (0−3.3V from a 10K pot) and isolated switch inputs (via PC817 optocouplers) for industrial use.
Space-Efficient 12V Boost DC-DC Regulator using LM2735X
This is a Step-up DC-DC converter that converts 3V to 5.5V input to 12V output for up to 200mA load current.
Isolated Analog Control with Potentiometer
This module is an Isolated Potentiometer featuring an LOC110 linear optocoupler (with 3750V isolation) and an isolated DC-DC converter, operating from a single 5V supply.
Push-Pull Voltage Mode PWM Controller
This project is a simple, low-voltage push-pull PWM controller using the TI LM5032 chip and two MOSFETs.
I2C Real-Time Clock module with DS3231M
This project uses the DS3231M I2C real-time clock (RTC) module for extremely accurate timekeeping.