Projects Projects
High Side Switch with Input Overvoltage and Overcurrent Protection
The project here is a 48V protected, high side switch designed to switch a 5A output load from input voltages from 8V to 48V.
3W Stereo Differential Input CLASS-D Audio Amplifier with UP/DOWN Volume
The circuit presented here is a 3W stereo audio amplifier with memory UP/DOWN volume control.
Galvanic Isolated 8 Channel High-Side Switch (0.6A per channel)
This project provides 8 fully protected and isolated high-side power switches that are able to handle current up to 625 mA.
Audio-Balanced Line Driver – Unbalanced Audio to Balanced Audio Converter
This audio-balanced line driver project enables to drive hundreds of feet in length of cables without becoming unstable The project is based on the THAT1646 chip, which is a new generation monolithic differential line driver that offers improved performance over conventional cross-coupled designs.
+/-10V (Dual 10V) to Single-Supply Signal Converter for ADC
This board will make your work easy if you want to interface +/- 10V (Dual 10V) device or sensor to single-supply signal ADC.
1.2V to 50V @ 3A – Adjustable Power Supply with 55Vdc Input
The project presented here is a wide input voltage range non-isolated DC-DC Converter, that provides a regulated, adjustable output voltage.
Two Channel Smart Low-Side Power Switch for Inductive, Resistive and Capacitive Loads – Arduino Shield
The project presented here enables users to switch all kinds of resistive, inductive and capacitive loads, limited by clamping energy (EAS) and maximum current requirement.
PIR Motion Sensor LED Ceiling Light – Arduino Compatible
This motion sensor LED ceiling light board has been designed using 4 white LEDs each of 1-3W, PIR sensor module, Atmega328 microcontroller, low ohm IRLR7843 MOSFET, and few other components.
16 High Power LEDs Knight Rider Light – Arduino Compatible
This is a Knight Rider LED Light and it is one of the best Arduino projects for beginners.
High Accuracy Adjustable Overvoltage and Overcurrent Protectors using MAX17561
If you need safe power to run your project, then this circuit is a possible solution for you.
6-Channel Capacitive Touch Sensor Module
The module described here is a 6-channel capacitive touch sensor.
LCDduino – Arduino Compatible 16×2 LCD module
The LCDduino board enables users to create many applications/projects that require a 16×2 LCD display and Arduino.