Projects Projects
Buck Converter 12V-76V Input, 5V DC Output
A buck converter board has been developed utilizing the BD9G341AEFJ, a non-synchronous DC/DC converter.
8 Channel Digital – 2 Channel Analog Isolator Module
The project presented here features an 8-channel digital and 2-channel analog isolator.
Dimmable Linear LED Controller
This 48V, 200mA dimmable linear LED driver is a highly reliable solution for various LED applications.
PWM Heater Driver
The project presented here is a high-current adjustable PWM (Pulse Width Modulation) source, designed to drive various loads such as PTC (Positive Temperature Coefficient) devices, DC motors, solenoids, high-power LEDs, and valves.
External (hardware) and timer interrupts in microPython
Do you know how to use external (hardware) and timer interrupts in microPython?.
Laser distance sensor with OLED display and RP2040
This article implements a laser distance sensor with OLED display and RP2040, using the VL53L0x laser distance sensor.
Installing and Running MicroPython on ESP32-C3 Super Mini
Introduction In this article we will install and run MicroPythonon on ESP32-C3 super mini, using a tool made by Espressif called “esptool“.
A more professional delay code without sleep() in microPython
Introduction If you use Arduino you may use it to implement code with delay() or delayMicroseconds().
Photodiode light level detection with Arduino
In today’s article, we will implement a photodiode light-level detection with Arduino UNO.
12-Bit – 4-Channel SPI V-OUT DAC
Digital-to-analog converters (DACs) provide accurate output voltages for actuation and control in many electronic applications such as industrial, medical, and RF systems.
Four-Channel Digital Isolator – Reinforced – High Speed – Low-Power
The project presented here is a high-speed, low-power 4-channel digital galvanic isolator.
Wireless Humidity and Temperature Receiver Unit – Arduino
This project is the receiving end of a Wireless Humidity and Temperature monitoring system.