Projects Projects
Bargraph Current Meter 0-1A Range – PIC16F686
Tiny Bar-Graph current meter displays a Red color bright, easy to read display of current range from 0 to 1A.
Bargraph Voltmeter 0-5V DC range – PIC16F686
Tiny Bar-Graph displays provide a Red color bright, easy to read display of Voltage range of 0 to 5V.
Dark Sensitive Lamp ON/OFF Controller
Dark Sensitive Lamp controller project switches a load connected to it when light falling on LDR (Light Dependent Resistor) goes bellow set point.
Sound to Light Effect
This PROJECTS will turn your favorite music into light effects, a microphone picks up the sound and gives light effects with 6 Red LEDs, ideal for creating fun atmosphere at parties & discos.
5 Amp H-Bridge DC Motor Driver using MC33886
This tiny module has been designed to be used in Robotics, Power tools, automotive applications etc.
5V to -12V Inverting Switching Regulator
The DC/DC inverting switching regulators project is specifically designed to invert input voltages to negative outputs.
Parallel Port Breakout board with Buffer for CNC & Routers
Parallel port I/O break out board designed for Hobby CNC, Routers and Motion controller , This Board is an easy solution to driver stepper Motor driver, AC Servo (with Step-DIR Driver) and DC servo (with Step-DIR Driver), The Board is compatible with various CNC software specially made for LPT port data out.
Optically Isolated LPT Breakout Board for CNC & Routers
Optically isolated parallel port break out board designed for Hobby CNC, Routers and Motion controller, This Board is an easy solution to drive stepper Motor driver through PC parallel port, The Board is compatible with various CNC software specially made for LPT port data output.
4.5Amps Bipolar Stepper Motor driver based on TB6600
Bipolar stepper drive board described here has been designed around TB6600HG IC.
4 Channel RC Servo Controller Board
This PIC microcontroller based RC driver is able to control 4 RC Servo by on board independent 4 potentiometer , 4X3PIN header for RC servo interface, screw terminal for supply input, on board power LED, optional 4X3PIN header connector for external potentiometer.
5V Step Down DC-DC Converter
This tiny Step-Down DC-DC converter project provides 5V @ 500mA output from supply input up to 25V DC.
12V to 28V Step Up DC-DC Converter
The Step-Up DC-DC Converter project provides 28V, 175mA output with input of 12V DC.