ESP32-C5 SoC Offers Dual-Band Wi-Fi 6, BLE, Zigbee, and Thread along with ESP32-C5-DevKitC-1 Development board
https://www.electronics-lab.com/esp32-c5-soc-offers-dual-band-wi-fi-6-ble-zigbee-and-thread-along-with-esp32-c5-devkitc-1-development-board/
The ESP32-C5 is a powerful RISC-V-based wireless SoC from Espressif Systems, now in mass production, and is the first in the industry to support dual-band Wi-Fi 6 (2.4 GHz and 5 GHz) along with Bluetooth 5 (LE) and IEEE 802.15.4 protocols like Zigbee and Thread. Designed for low-latency, high-efficiency wireless applications, it features a 32-bit […]
AvaotaF1 Development Board Offers Allwinner V821 SoC, 64MB RAM, MIPI Camera, SPI Display, and Wi-Fi in Coin-Size Form
https://www.electronics-lab.com/avaotaf1-development-board-offers-allwinner-v821-soc-64mb-ram-mipi-camera-spi-display-and-wi-fi-in-coin-size-form/
The AvaotaF1 DevKit is a compact, Pico-sized embedded development board designed for flexible and scalable DIY electronics and embedded system projects. Featuring the Allwinner V821L2-WXX main chip with integrated 32-bit RISC-V CPU, 64MB DDR2 and 32MB NOR Flash storage, this ultra-thin board—just the size of a 1-yuan coin—comes equipped with a variety of powerful features. It supports […]
Waveshare Launches $9.99 RP2350-CAN Development Board with Dual-Core MCU and CAN Bus Support
https://www.electronics-lab.com/waveshare-launches-9-99-rp2350-can-development-board-with-dual-core-mcu-and-can-bus-support/
Waveshare has recently launched the RP2350-CAN development board, a Pico-like MCU board based on Raspberry Pi RP2350A SoC with onboard XL2515 CAN Bus controller and a SIT65HVD230DR CAN transceiver. The board supports the CAN V2.0B protocol specification with a communication rate up to 1 Mbps, and the XL2515 chip appears to be a clone of […]
Raspberry Pi RP2350-based W6300-EVB-Pico2 Ethernet board supoprts 80+ Mbps data rates thanks to WIZnet W6300 QSPI Ethernet
https://www.electronics-lab.com/raspberry-pi-rp2350-based-w6300-evb-pico2-ethernet-board-supoprts-80-mbps-data-rates-thanks-to-wiznet-w6300-qspi-ethernet/
WIZnet has recently introduced the W6300-EVB-Pico2, a Raspberry Pi RP2350-based Ethernet board featuring the new W6300 QSPI Ethernet controller, designed to achieve Ethernet data rates exceeding 80 Mbps. Designed for applications that need higher-speed wired Ethernet connectivity with low MCU overhead. This can now be achieved thanks to its built-in TCP/IP Offload Engine (TOE). The […]
Nordic Semiconductor Launches nPM2100 Evaluation Kit for Ultra-Low Power Primary-Cell Applications
https://www.electronics-lab.com/nordic-semiconductor-launches-npm2100-evaluation-kit-for-ultra-low-power-primary-cell-applications/
Nordic Semiconductor has announced the launch of an evaluation kit for the company’s nPM2100 power management integrated circuit (PMIC) to boost battery life in low-power designs by optimizing power efficiency and system performance. The new power management chip features a very low-power hibernation mode that uses less than 200nA, built-in safety systems called watchdogs, and […]
P42 Pico2 M.2: Raspberry Pi RP2350A Development Board with M.2 A/E-Key Interface and Optional RISC-V Hazard3 Core
https://www.electronics-lab.com/p42-pico2-m-2-raspberry-pi-rp2350a-development-board-with-m-2-a-e-key-interface-and-optional-risc-v-hazard3-core/
The P42 Pico2 M.2 may look like an M.2 module, but it’s actually a Raspberry Pi RP2350 development board in M.2 3024 form factor. The M.2 interface has USB, UART, I2C, and control IO [Input/Output] connectivity. Adding an RP2350 microcontroller, the P42 Pico2 M.2 pops a Raspberry Pi’s second-generation in-house microcontroller design into any A-key […]
LILYGO T-Deck Pro: ESP32-S3 e-Paper Development Board with 4G and Voice Options
https://www.electronics-lab.com/lilygo-t-deck-pro-esp32-s3-e-paper-development-board-with-4g-and-voice-options/
LILYGO has released the T-Deck Pro, an open-source, feature-phone-form-factor, all-in-one ESP32-S3-based development board. It includes a 3.1-inch 320 x 240 ESP32-S3 e-paper IPS touchscreen LCD, a built-in BlackBerry-style QWERTY keyboard, GPS module, speaker, microphone, 3.5mm audio jack, and integrated IMU and light sensors. With sensors onboard and touchscreen support, the board is suitable for IoT […]
LILYGO T3-S3 MVSR is A ESP32-S3 LoRa voice communication board with mic, speaker, and OLED
https://www.electronics-lab.com/lilygo-t3-s3-mvsr-is-a-esp32-s3-lora-voice-communication-board-with-mic-speaker-and-oled/
The T3-S3 MVSR by LILYGO is a compact LoRa voice communication kit designed for long-range audio transmission using LoRa technology. It features a built-in vibration motor, speaker (MAX98357A), microphone (MSM261S4030HOR), and a 0.96-inch OLED display with a resolution of 128×64, driven by the SSD1306 I2C interface. At its core, it is powered by the ESP32-S3FH4R2 […]
Luckfox Nova Embedded Development Board Features Rockchip RK3308B SoC with 8-Channel Audio and PoE/Wi-Fi Options
https://www.electronics-lab.com/luckfox-nova-embedded-development-board-features-rockchip-rk3308b-soc-with-8-channel-audio-and-poe-wi-fi-options/
The Luckfox Nova is an embedded development board powered by the Rockchip RK3308B processor. This SoC features a 64-bit quad-core ARM Cortex-A35 CPU running at up to 1.3GHz, designed for smart voice interaction, audio signal processing, and multimedia applications. It integrates a high-performance Audio Codec and Voice Activity Detection (VAD) module for low-power voice wake-up […]
Makerdiary nRF9151 Connect Kit Brings IoT Dev Board with LTE-M, DECT NR+, GNSS to Developers
https://www.electronics-lab.com/makerdiary-nrf9151-connect-kit-brings-iot-dev-board-with-lte-m-dect-nr-gnss-to-developers/
Makerdiary has recently introduced the nRF9151 Connect Kit, a rapid prototyping kit designed for Cellular IoT applications, featuring LTE-M/NB-IoT, DECT NR+, and GNSS connectivity. Built around the nRF9151 SiP with a 64 MHz Arm Cortex-M33, 1 MB Flash, and 256 KB RAM, it supports secure processing with Arm TrustZone and CryptoCell. The board includes an […]