Haris Andrianakis writes:
After some modifications on my UV exposure box (scanner) for better UV expose, i desided that a better pcb must me designed for switch timer. The old one had over drilled holes and it was designed and built on my very fist steps. Also the high voltage side from the low voltage wasn’t seperated as it needed to be safe.
So i redesigned it in a more compact and easier to use pcb. The firmware has been also updated and now you can program the timmer by using the two buttons. The time is calculated by timer interrupt triggering using a 32.768KHz RTC Crystal with better accuracy. The display update also has been changed from static to dynamic.
PCB Exposure Switch Timer V2.0 - [Link]