Projects Projects
Fault Protected High Side Switch
This project uses the LT1910 high-side switch to protect a load from over-current.
Boost Converter 5V DC Input – 12V DC Output
This project is a compact boost converter circuit that steps up a 5V to 12V DC output using the LM2733 regulator.
4 Channel Optically isolated board with DC-DC converter
This 4-channel optocoupler module uses PC817 chips and a DC-DC converter for electrical isolation.
Load Cell Amplifier HX711 for Weigh Scale and Strain Gauge Sensor
This load cell amplifier uses the HX711 24-bit ADC for weigh scales and control.
INA122 Single Supply Micropower Instrumentation Amplifier Module
This low-noise INA122 precision instrumentation amp is ideal for portable data acquisition.
High-Voltage Isolated Half-Bridge Driver (Up to 1kV)
A fully isolated 1kV half-bridge driver for high-voltage use.
Serial-Input, Voltage-Output, 16-Bit DAC
The MAX5541 is a 16-bit digital-to-analog converter (DAC).
Intelligent High-Side Switch with Current Monitor
This high-side switch handles loads up to 10A.
Step-Up DC-DC Converter – Li-Ion battery Input to 9V output
This LM2700 step-up DC/DC converter is configured to efficiently generate a 9V output from a single Li-Ion battery.
High Voltage SiC-MOSFET Switch with Isolated Gate Driver and Isolated DC-DC Converter
The isolated high-voltage SiC MOSFET switch is a reliable and efficient solution for power driver applications.
High Voltage IGBT Module, Low-side Driver with Over-Current Protection and Fault/Enable
This IGBT driver module is a low-side gate driver that features integrated over-current protection.
Ultra Precision Zero Drift Current Sensor – Range Up To 12A
This LTC6102-based Ultra Precision Zero Drift High-Side Current-Sense Amplifier measures load current by amplifying the voltage drop across an on-board resistor.