Get the All NEW Raspberry Pi PoE+ HAT for $20
https://www.electronics-lab.com/get-the-all-new-raspberry-pi-poe-hat-for-20/
If you start a project on your favorite SBC in the market, Raspberry Pi, then you want fewer cables to run around the hardware. When you power the Raspberry Pi, you also require a separate ethernet connection that makes it two cables running across the hardware, making it look cumbersome. To solve this issue, we […]
Raspberry Pi’s RP2040 Chip Now Available for $1
https://www.electronics-lab.com/raspberry-pis-rp2040-chip-now-available-for-1/
Coming at a time when the global chip shortage is crippling productions across the world, Raspberry Pi Foundation CEO Eben Upton, today shared the news, which will no doubt gladden the heart of many, that the chip at the heart of the Raspberry Pi Pico development board; the RP2040, is now available for sale as […]
RP2040 M.2 Card with M.2 Connectivity Form Factor
https://www.electronics-lab.com/compatibility-of-rp2040-soc-with-m-2-connectivity-form-factor/
There has been a lot of discussion about the Raspberry Pi’s RP2040 SoC in the past few months after the release of the Raspberry Pi Pico. The RP2040 SoC is also popular for its high-frequency clock covering a large range of applications at a very low cost. Timonsku a hardware designer has come up with […]
Meet the ATMegaZero ESP32-S2 Based Development Board With RPI Zero Form Factor
https://www.electronics-lab.com/meet-the-atmegazero-esp32-s2-based-development-board-with-rpi-zero-form-factor/
Despite the recent release of the C3 and S3 versions, the ESP32-s2 has remained a fan favorite with more development boards and projects based on it, being released every now and then. One of the latest boards based on it is the ATMegaZero ESP32-S2 board developed by Espinal Lab. Modeled after their Raspberry Pi Zero […]
Aeotec’s Z-Pi 7 Z-Wave gateway module for your Raspberry Pi
https://www.electronics-lab.com/aeotecs-z-pi-7-z-wave-gateway-module-for-your-raspberry-pi/
If you have been using home automation devices to control, monitor, and status reading, they may employ the Z-Wave communication protocol. There have seen several SBCs that support the interface of the Z-Wave protocol, like the RK3568 development board. It is widely known for its ability to work among other wireless communication protocols like Wi-Fi, […]
Axon, A WiFi + LoRa Messaging Platform for IoT
https://www.electronics-lab.com/axon-a-wifi-lora-messaging-platform-for-iot/
Do you want to make your Arduino or Raspberry Pi wirelessly send messages? Think no more, Axon is the answer. With just only two wires (TX and RX) your microcontroller can talk to a Linux computer thousands of Km away, or maybe track the logs of your Raspberry Pi located in a 400m skyscraper. This […]
Bring your creations to life with LumiCube — an ultimate LED cube kit for the Raspberry Pi
https://www.electronics-lab.com/bring-your-creations-to-life-with-lumicube-an-ultimate-led-cube-kit-for-the-raspberry-pi/
A two-man team has created an ultimate LED cube kit for the Raspberry Pi, one that helps to bring your ideas and creativity to life. “We created the LumiCube to bring the joy of tinkering with technology to as wide an audience as possible. Perhaps you remember the fun and excitement of sitting in front […]
Raspberry Pi CM4 powers “Industrial Pi” panel PC and 10.1-inch “All-In-One Pi” system
https://www.electronics-lab.com/raspberry-pi-cm4-powers-industrial-pi-panel-pc-and-10-1-inch-all-in-one-pi-system/
Today, we will be covering two new products that were announced recently by Chipsee, and are powered by the Raspberry Pi compute module 4: a 7-inch “Industrial Pi” panel PC and a 10.1-inch “All-In-One Pi” system. Industrial Pi CM3-101-EM This new 7-inch panel PC seems to be the first panel PC to be powered by […]
Raspberry Pi Compute Module 4 IoT Router Carrier Board Mini
https://www.electronics-lab.com/raspberry-pi-compute-module-4-iot-router-carrier-board-mini/
Compute Module 4 IoT Router Carrier Board Mini is an internet expansion board based on the Raspberry Pi Compute Module 4. When connecting with a Gigabit network card via PCle, it brings Raspberry Pi CM4 two full-speed gigabit network ports and offers better performance, lower CPU usage, and higher stability for a long time work […]
Seeed Studio’s Dual Gigabit Ethernet Carrier Board Brings The CM4 To Router Projects
https://www.electronics-lab.com/seeed-studios-dual-gigabit-ethernet-carrier-board-brings-the-cm4-to-router-projects/
The latest design from Seeed Studio is one that will pique your interest if you are a software router enthusiast, a Linux developer, an HTPC maker, or just the regular Raspberry Pi user. It is a carrier board for the Raspberry Pi Compute Module 4 and it offers two Gigabit Ethernet ports. “The Dual Gigabit […]