Join the Community
Main Menu
Axiomtek MANO330 Intel Mini-ITX SBC Supports DDR5 and Triple Display
Norik Systems DECT NR+ USB Dongle Built Around Nordic nRF9151 SiP
Forgix Packs RP2354 MCU and Trion T8 FPGA into a $50 Teensy-Size Board
NXP Combines AM/FM Radio and AI Audio Processing in One Chip
Prevent Post-Launch Application Failures with Real-World Network Simulation
The Approach to AI Infrastructure Is the Real Bubble
Mastering the Curve: Layout Strategies for FPC Bend Radius and Reliability
From Hearing to Understanding: MEMS Microphones as a Foundation of Robotic Perception
Analog To Digital Conversion - Sampling and Quantization
Positive Feedback in Electronic Circuits
Temperature Sensors
Magnetostatic Fields In Material Bodies
High Current Half Bridge with Over-Current Shutdown
3-Wire Electret Microphone Pre-Amplifier
12W Step Up DC-DC Converter using MAX1771
Sound to Light Color Shield for OLEDUINO v2
An Introduction to RF Theory, Practices, and Components: The Ins and Outs of RF
The Growing Decentralization of Power Grids
Arduino Uno home weather station with e-ink display The hardware used for this project is: Waveshare 4.3 e-ink display Arduino Uno Adafruit BME280...
Arduino Nano Bar-Graph display with universal op-amp shield consists of 10 LEDs and single low voltage general purpose LMV321 op...
4 Digit Multiplexed display shield for Arduino Nano with on board 2 tactile switches and LM35 temperature sensor.
2 Channel Mini easy to use Relay shield for Arduino Nano consists of ULN2003 IC and 2 Mini 12V Relays with NO/NC contacts of...
The concept of this board is to build an open, very versatile frequency counter, so it can be used to measure a wide variety of...
1A Constant current LED driver shield for Arduino Nano has been designed for verity of LED related applications.
Martina @ natural-nerd.com build a sound reacting LED light using Arduino: Hi!
MellBell, the Canadian-based hardware and electronics company, has launched their first product: Arduino PICO!
Managing some of house devices with its IR remotes may be annoying if you are out of its line of sight.
Two years ago, open electronics had produced “RandA“, an Atmega328-based board for Raspberry Pi to deliver the advantages of bot...
Dessislav Gouzgounov @ hackaday.io build an Arduino Due based, open source, goto telescope controller.
Time can be calculated using the azimuth of the sun (aka solar time).
