HomeTest & Measurement

Blog

Categories

Grapple Probe – An Isolated USB CMSIS-DAP Debug Probe with UART and I2C

Grapple Probe – An Isolated USB CMSIS-DAP Debug Probe with UART and I2C

Built for embedded development, the probe combines CMSIS-DAP debugging with UART and I2C interfaces while electrically isolating...

Test & Measurement by Debashis Das
Everypin PwrBlock 323: Compact 32V, 3A Programmable Power Supply

Everypin PwrBlock 323: Compact 32V, 3A Programmable Power Supply

Open-hardware PwrBlock 323 delivers up to 92W with USB-C PD, automated power cycling, precise control, and SCPI support for...

Power supply Test & Measurement by Sayantan Nandy
B&K Precision Debuts 2-in-1 RF Signal and Arbitrary Waveform Generator

B&K Precision Debuts 2-in-1 RF Signal and Arbitrary Waveform Generator

A single 2U chassis now houses independent carrier and baseband channels, helping to reduce bench clutter for RF and mixed-signal...

General Electronics RF / Wireless Test & Measurement by Electronics-Lab Staff
Danisense’s DP12IP Squeezes ppm-Class Precision Into a 32mm Package

Danisense’s DP12IP Squeezes ppm-Class Precision Into a 32mm Package

New PCB-mount fluxgate transducer targets isolated DC/AC measurement up to 18 A for compact, high-stability power electronics...

Power Sensors Test & Measurement by Electronics-Lab Staff
KYOCERA AVX Launches Web-Based Antenna Selection Tool

KYOCERA AVX Launches Web-Based Antenna Selection Tool

A new online platform lets RF engineers preview board placement and simulated performance before a physical prototype exists.

EDA Tools RF / Wireless Test & Measurement by Electronics-Lab Staff
PEAK Enters Automotive Ethernet with New Media Converter

PEAK Enters Automotive Ethernet with New Media Converter

HMS Networks' PEAK brand debuts its first Automotive Ethernet device, bridging 100/1000BASE-T1 with standard Ethernet for vehicle development and...

Automotive Comm and Networking Test & Measurement by Electronics-Lab Staff
Menlo Micro’s MM5800 Brings Micromechanical Switching to 70 GHz

Menlo Micro’s MM5800 Brings Micromechanical Switching to 70 GHz

The SPDT device combines 0.5 dB insertion loss, 95 dBm IIP3, and cryogenic operation for next-generation test, satellite, and...

Comm and Networking RF / Wireless Test & Measurement by Electronics-Lab Staff
bUniProbe – Open Source Wireless Multi-Protocol Hardware Debugger Tool

bUniProbe – Open Source Wireless Multi-Protocol Hardware Debugger Tool

A compact Wi-Fi-enabled debugger whcih combining SPI, I²C, UART, CAN, GPIO, ADC, and DAC into one browser-accessible platform — no...

Test & Measurement by Debashis Das
SIGLENT’s New AWG Combines RF Synthesis, IQ Modulation, and Sequencing

SIGLENT’s New AWG Combines RF Synthesis, IQ Modulation, and Sequencing

The SDG8000A pairs 16-bit resolution and 12 GSa/s sampling with direct 5 GHz output and vector signal creation for wireless,...

Comm and Networking RF / Wireless Test & Measurement by Electronics-Lab Staff
High-Speed Data Acquisition: B&K Precision Launches Portable Dual-Slot System

High-Speed Data Acquisition: B&K Precision Launches Portable Dual-Slot System

The new compact DAS1820 data acquisition system features a plug-and-play dual-slot chassis with up to eight channels, 1 MSa/s...

Analog Test & Measurement by Electronics-Lab Staff
Extreme Temperature Probe Tips Measure Direct Current in Harsh Environments

Extreme Temperature Probe Tips Measure Direct Current in Harsh Environments

Tektronix has added extreme temperature probe tips to its IsoVu isolated current probe platform, enabling direct current...

Industrial IoT Test & Measurement by Electronics-Lab Staff
Siglent Adds Cost-Effective, Entry-Level Model to Its Vector Network Analyzers

Siglent Adds Cost-Effective, Entry-Level Model to Its Vector Network Analyzers

The SNA5000X-E vector network analyzer features a 9 kHz to 6.5 GHz frequency range, a 125 dB typical dynamic range, and various...

RF / Wireless Test & Measurement by Electronics-Lab Staff