HomeUSBPage 20

Blog

Categories

Opensource USB HUB

Opensource USB HUB

Christian @ hackaday.io build his own USB Hub based on GL850G IC: I was looking to make a custom USB Hub for a project but I...

Comm and Networking Raspberry Pi USB by mixos
Pastilda: Open-source Hardware Password Manager

Pastilda: Open-source Hardware Password Manager

Pastilda is an open-source hardware password manager, designed to manage your credentials in a handy and secure way.

USB by mixos
Reference design – USB Type-C charger delivers 18W

Reference design – USB Type-C charger delivers 18W

Graham Prophet @ eedesignnewseurope.com discuss about a 18W USB power supply reference design.

Power USB by mixos
2.5V to 36V, 2.5MHz, PWM Boost Controller with 4μA Shutdown Current

2.5V to 36V, 2.5MHz, PWM Boost Controller with 4μA Shutdown Current

by Graham Prophet @ eedesignnewseurope.com: Maxim Integrated has posted details of the MAX17290/MAX17292 high-efficiency,...

Power USB by mixos
NanoPi NEO kit lets you build your own network-attached storage system for about $30

NanoPi NEO kit lets you build your own network-attached storage system for about $30

Brad Linder@ liliputing.com writes: The NanoPi Neo is a tiny computer with a quad-core ARM Cortex-A7 processor, Ethernet and USB...

Microcontrollers Raspberry Pi USB by mixos
3-axis accelerometer performs wake-up in consumer designs

3-axis accelerometer performs wake-up in consumer designs

Kionix (Ithaca, New York), part of the Rohm Group, has added the KXTJ3 3-axis low-cost accelerometer that offers the performance...

SoM / CoM USB by mixos
USB Curve Tracer

USB Curve Tracer

A small and inexpensive USB-based curve tracer used for troubleshooting electronics in the style of the Huntron Tracker 2000.

Test/Measurements USB by mixos
AT88CK490, A New Atmel CryptoAuthentication USB Dongle Evaluation Kit

AT88CK490, A New Atmel CryptoAuthentication USB Dongle Evaluation Kit

Atmel had produced a new USB evaluation kit “AT88CK490” to evaluate the performance and applicability of the Atmel Family of Cry...

Memory Microcontrollers USB by AlHasan Muhammad Ali
XPlotter, The All-In-One Plotter, Engraver and Laser Cutter

XPlotter, The All-In-One Plotter, Engraver and Laser Cutter

XPlotter is an affordable and easy to use desktop plotter, Laser cutter and engraver.

USB by AlHasan Muhammad Ali
ChargEST, A Travel Adapter To Charge Your Devices

ChargEST, A Travel Adapter To Charge Your Devices

When you travel, it’s a bit frustrating to fill your luggage with lots of chargers, cables, and adapters to fit your charging n...

Cables & Connectors Power USB by AlHasan Muhammad Ali
2.5V-4.2V input to 3.3V output – 1A Buck Boost Converter using LTC3441

2.5V-4.2V input to 3.3V output – 1A Buck Boost Converter using LTC3441

This circuit can produce an output of 3.3V and 1A current continuously for a voltage input varying from 2.5V to 4.2V.

General Electronics Power USB by mixos
Designing a simple and cheap temperature logger

Designing a simple and cheap temperature logger

pickandplace.wordpress.com writes: I started with making the TMP102 temperature sensor work.

Microcontrollers USB by mixos