Join the Community
Main Menu
xMEMS' Solid-State Micro Fan Tackles Smart Glasses Thermal Limits
Axiomtek MANO330 Intel Mini-ITX SBC Supports DDR5 and Triple Display
Norik Systems DECT NR+ USB Dongle Built Around Nordic nRF9151 SiP
Forgix Packs RP2354 MCU and Trion T8 FPGA into a $50 Teensy-Size Board
Prevent Post-Launch Application Failures with Real-World Network Simulation
The Approach to AI Infrastructure Is the Real Bubble
Mastering the Curve: Layout Strategies for FPC Bend Radius and Reliability
From Hearing to Understanding: MEMS Microphones as a Foundation of Robotic Perception
Analog To Digital Conversion - Sampling and Quantization
Positive Feedback in Electronic Circuits
Temperature Sensors
Magnetostatic Fields In Material Bodies
High Current Half Bridge with Over-Current Shutdown
3-Wire Electret Microphone Pre-Amplifier
12W Step Up DC-DC Converter using MAX1771
Sound to Light Color Shield for OLEDUINO v2
An Introduction to RF Theory, Practices, and Components: The Ins and Outs of RF
The Growing Decentralization of Power Grids
Analog Devices Inc.
ScioSense ENS160 Digital Metal Oxide Multi-Gas Sensors offer a 1.67V to 1.98V supply voltage range and up to +85°C temperature ...
STMicroelectronics’ single-chip half-bridge gate driver is designed for enhancement mode GaN FETs or N-channel power MOSFETs S...
The NCP5156x are isolated dual-channel gate driver with up to 4-A/8-A source and sink peak current.
Microchip Technology has released 24CS512, the first commercially available I2C Serial EEPROM with support for 3.4 Mbit/s data...
The project described here is a pre-driver for brushless motors with a hall sensor.
ARM has developed the first full 32bit microcontroller built on a flexible plastic material using a 0.8 μm process from PragmatIC.
This is an easy to build and very useful project for hobbyists and students to learn and create op-amp-based projects.
iWave Systems is pleased to inform about the VxWorks BSP release for its XILINX UltraScale+ MPSoC System on Modules.
We have come across multiple hardware development boards and MCUs that employ Edge AI for processing and computing.
SparkFun QuickLogic Thing Plus was originally crowdfunded on CrowdSupply that raised around $4500.
