Join the Community
Main Menu
EPC's EPC2370 GaN FET Targets High-Current AI Server Power Rails
AAEON PICO-ADN2 SBC Packs Intel N97 and Core i3-N305 in Pico-ITX
Nordic’s nRF93M1 Development Kit Targets LTE Cat 1 bis IoT Prototyping
IBM's New Mainframe Chip Runs Arm and IBM Z Instructions Natively
Prevent Post-Launch Application Failures with Real-World Network Simulation
The Approach to AI Infrastructure Is the Real Bubble
Mastering the Curve: Layout Strategies for FPC Bend Radius and Reliability
From Hearing to Understanding: MEMS Microphones as a Foundation of Robotic Perception
Analog To Digital Conversion - Sampling and Quantization
Positive Feedback in Electronic Circuits
Temperature Sensors
Magnetostatic Fields In Material Bodies
High Current Half Bridge with Over-Current Shutdown
3-Wire Electret Microphone Pre-Amplifier
12W Step Up DC-DC Converter using MAX1771
Sound to Light Color Shield for OLEDUINO v2
An Introduction to RF Theory, Practices, and Components: The Ins and Outs of RF
The Growing Decentralization of Power Grids
This is another Arduino Nano shield which can drive a Brushed DC Motor in both directions with PWM signal for speed control and...
This board provides 12V/200mA DC and 1.2V to 6V/500mA DC Adjustable output with input of 7.4V 2x LiPO batteries.
Simple solar charger 35V/8A with automatic MPPT supporting SLA/Li-Ion/LiFePO4 up to 8s.
Another app note from Maxim Integrated on small current battery management.The circuit provides a 1-cell Li ion backup battery...
Maxim MAX17250 DC-DC Boost Converter is a high-efficiency, low quiescent current, synchronous boost (step-up) converter with True...
Want to connect several motors and sensors to your mechatronic project?
Over 60% Smaller than Conventional Products, Contributing to the Development of Smaller Wearable Devices.
David Johnson-Davies designed a GPS module that decodes the NMEA sentences on ATtiny841, and this also runs the I2C slave routine.
Arduino is an open source software and electronics platform that has evolved the open hardware, DIY (do it yourself), makers,...
Three open-spec SBCs have been launched on Indiegogo.
The trigBoard is an IoT project that does one thing – it pushes you a notification triggered by a digital input.
A Wi-Fi repeater is a device used to improve the coverage area of a WiFi network by amplifying existing WiFi signals and...
