Join the Community
Main Menu
AAEON PICO-ADN2 SBC Packs Intel N97 and Core i3-N305 in Pico-ITX
Nordic’s nRF93M1 Development Kit Targets LTE Cat 1 bis IoT Prototyping
IBM's New Mainframe Chip Runs Arm and IBM Z Instructions Natively
Radxa rCore-Q8280 SoM Packs Qualcomm Snapdragon 8cx Gen 3 and 29+ TOPS AI
Prevent Post-Launch Application Failures with Real-World Network Simulation
The Approach to AI Infrastructure Is the Real Bubble
Mastering the Curve: Layout Strategies for FPC Bend Radius and Reliability
From Hearing to Understanding: MEMS Microphones as a Foundation of Robotic Perception
Analog To Digital Conversion - Sampling and Quantization
Positive Feedback in Electronic Circuits
Temperature Sensors
Magnetostatic Fields In Material Bodies
High Current Half Bridge with Over-Current Shutdown
3-Wire Electret Microphone Pre-Amplifier
12W Step Up DC-DC Converter using MAX1771
Sound to Light Color Shield for OLEDUINO v2
An Introduction to RF Theory, Practices, and Components: The Ins and Outs of RF
The Growing Decentralization of Power Grids
This is a USB-stick sized UPDI programmer, for programming Microchip’s new 0-series and 1-series ATtiny chips from the Arduino I...
SeeedStudio GD32 RISC-V Dev Board is based on GD32VF103VBT6 MCU which can run at up to 108MHz, this kit comes with a 2.8 inch LCD.
Recently, there was a lot of buzz as the 32bit general purpose GigaDevice GD32V which is based on RISC-V open architecture as...
What if your PCB can be designed in just a few minutes, with you providing only the specifications and selecting the major...
David Johnson-Davies published another great tiny project.
Great Cow BASIC is a robust and fully functional compiler and assembler for 8-bit microchip PIC and Atmel AVR microcontrollers.
SECO, the company behind the brilliant UDOO X86, recently announced the release of another version of the board which is being...
There are several ways to design a system-on-module to carrier board interface, one method is to design an LGA (Land Grid Array) module, which have...
A while back in May 2018 at the Maker Faire Bay Area, Arduino after a long year of legal battles announced the launch of two...
HealthyPi v4 is a wireless, wearable, open source vital signs monitor powered by ESP32.
Visualizations are an important part of a music player.
This article describes a set of minimal I2C routines for the new 0-series and 1-series ATtiny and ATmega microcontrollers.
