Category: Power

Power-module designs require high power density, excep-tional thermal performance and a full feature set in order to be competitive. One way that power-module designs can meet these needs is with buck controllers with exter-nal metal-oxide-semiconductor field-effect transistors...

15 A 100V Isolated Half bridge driver project intended to be used for DC-DC converters, inverters, LED driver and motor driver applications. This projects is really helpful in industrial applications where noise is a concern since project provides optical isolation between...

Pretty Good Cheap Power Supply Unit - PGCPSU. Get the best tiny power supply for your battery powered projects! PGCPSU is a three in one power supply board: it integrates a lithium battery charge management circuit with 5V and 3.3V DC-DC converter-based output rails to power most...

Maxim MAXM17552 Compact Step-Down Power Modules are part of the Himalaya series of voltage regulator ICs that offer cooler, smaller, and simpler power-supply solutions. The high efficiency, synchronous, step-down MAXM17552 DC-DC power module consists of an integrated controller,...

This is a great collection of on-demand training on battery management solutions from Texas Instruments. TI's battery experts have decades of experience. Their battery scientists bring cutting-edge solutions for new battery chemistries & technologies, from charging, gauging,...

This board provides 12V/200mA DC and 1.2V to 6V/500mA DC Adjustable output with input of 7.4V 2x LiPO batteries.  The board is a step up DC-DC Convert based on CS5171 and LM317 adjustable regulator. The Step up DC-DC converter provides 12V DC from 7.4V ( 2x LiPO batteries) and LM317...

Another app note from Maxim Integrated on small current battery management.The circuit provides a 1-cell Li ion backup battery charger for low-current devices performing resistor limited current sharing. A simple circuit sometimes needs to charge a 1-cell Lithium-ion (Li+) battery from...

The XCL206 series is a synchronous step-down micro DC/DC converter which integrates an inductor and a control IC in one tiny package (2.5mm×2.0mm, H=1.0mm). A stable power supply with an output current of 600mA is configured using only two capacitors connected externally. Operating...