Tag Archives: Toner

Unprinter removes Ink from Documents

33 total views, no views today


The paperless office clearly is an illusion as people continue to print and photocopy incredible amounts of emails, memos and other useless documents that end up in the bin. So if we cannot get rid of paper in the office, maybe we can remove the ink from it and then use the paper again?

An engineering team at the University of Cambridge in the UK has figured out how to erase pages by vaporizing common toners using a laser-based technique that doesn’t damage the underlying paper. The key idea was to find a laser energy level that is high enough to vaporize the toner without destroying the paper on which it is fixed. After many experiments it was found that 4-ns pulses with a wavelength of 532 nm (green light) worked best. [via]

Unprinter removes Ink from Documents – [Link]

Make your own Microcontroller Printed Circuit Board (PCB) using the Toner Transfer Method

64 total views, no views today


ermicro.com writes:

As the electronics hobbyist one of knowledge that we have to be familiar with is how to make our own printed circuit board (PCB). Making our own simple single side PCB actually is not require a sophisticated technique and technology as you might think, instead most of the required materials is already available at your home. I’ve started make my first single side through-hole PCB for a simple two transistors astable multivibrator project using just a water proof marker and draw the PCB layout directly on the PCB copper surface.

Make your own Microcontroller Printed Circuit Board (PCB) using the Toner Transfer Method – [Link]

Direct PCB inkjet printing

56 total views, no views today


Rhys Goodwin managed to print a PCB with a silkscreen using a modified inkjet printer. He used a inkjet/toner hybrid method to print the PCB. The hybrid method can stand up to Cupric Chloride etchant which is helpful when you don’t have access to Ferric Chloride. First Rhys Goodwin prints with black ink, then he covers the board with laser toner and finally blow the excess toner and bake the board. With board bake the pcb traces can resist the etching acid. The same method is used to print the silkscreen.  [via]

Direct PCB inkjet printing – [Link]

Two sided PCB using toner method

49 total views, no views today



Jmengel shows another way to make two-sided PCBs at home –

This instructable assumes that you know how to generate a layout file using Eagle PCB or similar layout program. I use the toner transfer method of making PCB’s (printed circuit boards) much like many others. The basic idea is to use a glossy paper, print the PCB design on the paper using a laser printer, and to use a hot iron to transfer the toner to the copper. I use the glossy paper that they have behind the counter at Kinko’s. Go to Kinko’s and ask for some sheets of their glossy laser paper, which is really cheap (about 5 cents a sheet). Some people advocate using glossy inkjet photo paper, but I think this is a waste and the cheap glossy laser paper comes off easier.

Anyway, once you have your design and paper, you will need to print the design. The key here is to mirror the top layer so that it will come out correct once transferred to the copper board. It can also help to include alignment marks (the T shaped things in the pic) beyond the edge of your PCB to help you align the two layers.

Two sided PCB using toner method – [Link]

Cheap and Easy Toner Transfer for PCB Making

45 total views, no views today



There are lots of people mentioned about using Inkjet Glossy Paper to do Toner Transfer. It can be done. But it is not easy to remove it after ironing. You have soak the PCB in hot water for more than ten minutes. It is quite time consuming. If you cannot remove the coating completely. It cannot be etched.

Cheap and Easy Toner Transfer for PCB Making – [Link]