iWave releases first Xilinx Zynq 7000 based SOM Module
FPGASBC

iWave releases first Xilinx Zynq 7000 based SOM Module

The Zynq 7000 family based on the All Programmable SoC architecture are processor-center platforms that offer software, hardware and I/O programmability in a single chip. iWave Systems which has released several Altera based FPGA system on modules has just announced its SODIMM (Small...

Continue Reading
5.961
Views
0 Comments
Eclypse Z7: Zynq-7000 SoC Development Board with SYZYGY-compatible Expansion
FPGA

Eclypse Z7: Zynq-7000 SoC Development Board with SYZYGY-compatible Expansion

The Eclypse Z7 is Digilent's newest FPGA/SoC designed to enable systems that are ultra high-speed and highly modular, featuring Xilinx's Zynq-7000 PSoC. Zynq, plus the Zmod expansions and Digilent's new software architecture results in a powerful research and prototyping platform...

Continue Reading
3.308
Views
0 Comments
PYNQ-Z1: Python Productivity for Zynq-7000 ARM/FPGA SoC
FPGA

PYNQ-Z1: Python Productivity for Zynq-7000 ARM/FPGA SoC

Python Productivity for Zynq - A Special Project from Xilinx University Program The PYNQ-Z1 board is designed to be used with PYNQ, a new open-source framework that enables embedded programmers to exploit the capabilities of Xilinx Zynq All Programmable SoCs (APSoCs) without having to...

Continue Reading
4.132
Views
0 Comments
Enabling 4K Ultra HD Capabilities Through iWave’s Zynq Ultrascale+ MPSoC Platform
FPGA

Enabling 4K Ultra HD Capabilities Through iWave’s Zynq Ultrascale+ MPSoC Platform

The emergence of HDMI 2.0 and the widespread acceptance of this technology is making a deep impact on the multimedia and entertainment industry in our emerging economy. And the urge to support high-speed data transmission and ongoing advancements has made industries to focus on...

Continue Reading
2.031
Views
0 Comments
Meet the ZynqBerryZero: An FPGA Development Board with a Raspberry Pi Zero Form Factor
FPGA

Meet the ZynqBerryZero: An FPGA Development Board with a Raspberry Pi Zero Form Factor

Germany Based Trenz Electronics, has released a new FPGA development board, a 3 x 6.5cm SoC module with integrated Xilinx Zynq-7010 FPGA and a Pi Zero form factor, called the ZynqBerryZero. New ZynqBerryZero, nicknamed "little cousin" to older Zynqberry, is the latest addition to the...

Continue Reading
6.298
Views
0 Comments
Low Cost Sipeed Tang HEX Features Xilinx Zynq-7020
SBC

Low Cost Sipeed Tang HEX Features Xilinx Zynq-7020

    Chinese vendor Sipeed has announced a $72, open spec “Sipeed Tang Hex” SBC which supports Linux on a Xilinx Zynq-7020. This is coming after they recently launched a Sipeed MaxiCube dev based on a Kenryte K210 RISC-V chip, and a FPGA board called Sipeed Tang based on...

Continue Reading
4.221
Views
0 Comments
Epiq Solutions Develops Wideband RF Transceiver SDR Module Running Linux On Zynq SoC
RFSBC

Epiq Solutions Develops Wideband RF Transceiver SDR Module Running Linux On Zynq SoC

Epiq Solutions, a company from the USA, has included a new member of its Sidekiq line of Software-defined radio (SDR) add-on cards called the Sidekiq Z2. Dimensions of this card are only 51 x 30 x 5mm, the size of a full-size mini-PCIe card, the Sidekiq Z2 computer-on-module is...

Continue Reading
7.346
Views
0 Comments
TE0722 Zynq DIPFORTy1 “Soft Propeller” Module
IoTMcu

TE0722 Zynq DIPFORTy1 “Soft Propeller” Module

The DIPFORTy1 is a powerful Xilinx based FPGA board with small form factor and many programmable I/Os. It is popular for its high performance at most competitive price. Introduction: The TE0722 is based on the Xilinx Zynq-7000, a System on Chip. It contains a FPGA and a Dual Core...

Continue Reading
6.803
Views
0 Comments
Get new posts by email:
Get new posts by email:

Join 97,426 other subscribers

Archives