A Tiny Serial Terminal based on ATtiny85
LCD/OLED/ePaperMcu

A Tiny Serial Terminal based on ATtiny85

This is a Tiny Serial Terminal based on ATtiny85 and 256x64 OLED SH1122 display able to show 42 characters per line. David Johnson-Davies writes: This article describes a text display based on a 256x64 OLED display that provides 8 lines of 42 characters per line. Its width makes it...

Continue Reading
5.972
Views
0 Comments
nRF52840 Micro Development Kit – USB Dongle
Mcu

nRF52840 Micro Development Kit – USB Dongle

The nRF52840 Micro Dev Kit USB Dongle is a small and low-cost development platform enabled by the nRF52840 multi-protocol SoC in a convenient USB dongle form factor. The nRF52840 Micro Dev Kit USB Dongle features a programmable user button, RGB LED, up to 12 GPIOs and 2.4G Chip antenna...

Continue Reading
4.328
Views
1 Comments
NXP i.MX 8M family of applications processors
Mcu

NXP i.MX 8M family of applications processors

Outstanding audio, voice and video processing The i.MX 8M family of applications processors based on Arm® Cortex®-A53 and Cortex-M4 cores provide industry-leading audio, voice and video processing for applications that scale from consumer home audio to industrial building automation...

Continue Reading
8.619
Views
0 Comments
Using a Raspberry Pi to program an ATTiny10/9/5/4
Mcu

Using a Raspberry Pi to program an ATTiny10/9/5/4

Using a Raspberry Pi to program an ATTiny4/5/9/10. But, mostly the $0.25 ATTiny10. And, not necessarily a Raspberry Pi, but anything with GPIOs! Yep. It works. At least tested pretty thoroughly with my ATTiny10. It can also read all the memories AND run timings against the AVR to do...

Continue Reading
3.678
Views
0 Comments
Latest Nucleo boards access open source 8-bit MCU I/Os
Mcu

Latest Nucleo boards access open source 8-bit MCU I/Os

STMicroelectronics has introduced two STM8* Nucleo development boards, letting the 8-bit world experience the ease of access and extensibility already proven with the STM32* Nucleo range. Leveraging the formula that has kickstarted countless STM32 embedded projects, the STM8 Nucleo...

Continue Reading
3.324
Views
0 Comments
Tiny Function Plotter using ATtiny85
LCD/OLED/ePaperMcu

Tiny Function Plotter using ATtiny85

David Johnson-Davies build a OLED display function plotter based on ATtiny85 microcontroller. He writes: This project describes a simple routine for plotting a function on a 128x64 I2C OLED graphics display. Unlike most Arduino graphics libraries this routine doesn't require a RAM...

Continue Reading
5.314
Views
0 Comments
1 Square Inch 20MSPS Oscilloscope
Mcu

1 Square Inch 20MSPS Oscilloscope

A 1" by 1" 20msps Oscilloscope based on the PIC32MZ @ hackaday.io by "Mark Omo". He writes: This project is designed around a PIC32MZ EF processor. We use its internal ADCs in an interleaved mode in order to get the full 20Msps. We have found that in practice we are able to achieve...

Continue Reading
5.346
Views
0 Comments
MPLAB Snap debugger programmer
McuTop Stories

MPLAB Snap debugger programmer

RS Components is now stocking Microchip’s MPLAB Snap in-circuit debugger/programmer, for simple and quick debugging and programming of most Microchip PIC, AVR and SAM flash MCUs. [via] The MPLAB® Snap In-Circuit Debugger/Programmer allows affordable, fast and easy debugging and...

Continue Reading
5.224
Views
0 Comments
Get new posts by email:
Get new posts by email:

Join 97,426 other subscribers

Archives