1.3V – 15.5V @ 2 Amps Power Supply
https://www.electronics-lab.com/1-3v-15-5v-2-amps-power-supply/
Here is a low cost and easy to build power supply based on a some Chinese DC-DC converter modules: This is a small size power supply with low cost and easy to make that only taking about 5 more hours. I was very happy with it and would share with you. Power Supply Specifications Input: […]
LTM8064 – 58VIN, 6A CVCC Step-Down μModule Regulator
https://www.electronics-lab.com/60v-7a-micro-module-regulator-drives-leds-supercaps-lasers-peltiers/
LTM8064 is a step-down DC/DC µModule (micro-module/power module) regulator with a 6V to 58V (60Vmax) input voltage range and adjustable load current control with ±10% accuracy at 7A. Linear Technology introduces the LTM8064, a step-down DC/DC µModule® (power module) regulator with a 6V to 58V (60Vmax) input voltage range and adjustable load current control with […]
5V to 400V DC-DC converter
https://www.electronics-lab.com/5v-to-400v-dc-dc-converter/
Bob has tipped us with his latest project. It’s a 5V to 400V DC-DC Converter based on MC34063 IC and can be used in various projects such as Geiger–Müller counters. A small and cheap 5V/400V DC/DC converter can be useful in many DIY projects, e.g Geiger–Müller counters. I will present here one of such DC/DC converter based […]
LTC3106 – 300mA Low Voltage Buck-Boost Converter with PowerPath
https://www.electronics-lab.com/47113-2/
Linear Technology announces the LTC3106, a highly integrated, 1.6µA quiescent current 300mV start-up buck-boost DC/DC converter with PowerPath™ management, optimized for multisource, low power systems. The LTC3106 is ideal for powering low power wireless sensors from rechargeable or primary batteries supplemented by energy harvesting. The LTC3106 incorporates maximum power point control (MPPC) making it compatible […]
LTC3106 – 300mA Low Voltage Buck-Boost Converter
https://www.electronics-lab.com/46786-2/
The LTC3106 is a highly integrated, 1.6μA quiescent current 300mV startup buck-boost DC/DC converter with PowerPath management, optimized for multisource, low power systems. The LTC3106 is ideal for powering low power wireless sensors from rechargeable or primary batteries supplemented by energy harvesting. If the primary power source is unavailable, the LTC3106 seamlessly switches to the […]
LT8714 – 80V/5A synchronous 4-quadrant DC/DC controller
https://www.electronics-lab.com/lt8714-80v5a-synchronous-4-quadrant-dcdc-controller/
Linear Technology Corporation announces the LT8714, an 80V input synchronous PWM four quadrant output DC/DC controller. This device cleanly transitions the output voltage through zero volts with up to 5A sourcing and sinking current capability, regardless of the output voltage polarity, making it ideal for regulating to positive, negative, or zero volts. The bipolar output […]
1.2V TO 35V DC-DC CONVERTER
https://www.electronics-lab.com/1-2v-to-35v-dc-dc-converter/
1.2V to 35V Adjustable DC-DC Converter project has been design around TI’s LM2576-ADJ IC. Inputs supply 40 VDC. LM2576-ADJ is a monolithic integrated circuit that provides all the active functions for step down switching regulator, capable of driving 3A load with excellent line and load regulation.this board has minimum number of components. Features Output 1.2 […]
1A from the sugar cube sized module
https://www.electronics-lab.com/1a-from-the-sugar-cube-sized-module/
With continuous improvement TRACO unveils the SMD version of enormously successful 1A DC/DC converter, the TSR1SM. The TSR1SM series models of step-down switching regulators (non isolating – POL) have a high efficiency up to 96 % which allows full load operation up to +65°C ambient temperature without the need of any heat transmission layer. Excellent […]
MC34VR500V1ES Multi-Output DC/DC Regulator
https://www.electronics-lab.com/mc34vr500v1es-multi-output-dcdc-regulator/
The circuit in this reference design features the capability of MC34VR500V1ES to supply multiple DC voltage outputs. This device is designed to support the LS1/T1 family of communication processors, which require efficient and precise level of voltage supplies. With its four switching and five linear regulators, the MC34VR500V1ES can supply power to the whole system, […]
Arduino Battery Shield
https://www.electronics-lab.com/arduino-battery-shield/
This instructable is about making battery shield for Arduino. Arduino Battery Shield – [Link]