Boris Landoni @ open-electronics.org designed COLIBRI, a board able to drive 4 color LEDs. He writes: Recently some multicoloured power LEDs have appeared on the market and, differently from the more common RGB LEDs, they incorporate a white LED, as an addition: they are named RGBW...

This article is the first of a series detailing the design and build process of an Arduino controlled Dual Mono AK4490 DAC by DimDim: The design goal was to do a dual mono design so as to maximize SNR and channel separation. A 4-layer PCB design was chosen so as to have a very solid,...

Sasa Karanovic @ sasakaranovic.com build a heart shaped keychain that flashes 2 LED with the touch of your finger! Source files are available on github. This one is a very simple but cool project, something that I would recommend to anyone who is interested into DIY electronics,...

Libre has released a three flavor board called Tritium. The first board is a 32bit Allwinner H2+ based with 512MB onboard memory and costs only $9. The next one is in the range of $19, and is based around the 32-bit Allwinner H3, has 1GB onboard and is capable of 4K30 output via the...

Electronut Labs recently released their open source Nordic nRF52832 development board that can be used for your next BLE project. This tiny board can be plugged on a breadboard or soldered on a PCB and provides additional value from just using the BLE module directly as it includes...

Over the years FPGAs have become readily available to the maker community. They are now more accessible than ever as many development boards has seen the light. It’s now possible to embed a soft-core MCU into an FPGA  rather than using a hard-core ASIC MCU and here is where PulseRain...

4D Systems, the manufacturer of intelligent graphics solutions, has announced a new 0.9” smart display module as part of the ‘IoD-09’ series. This series is a set of small full-color TFT display modules that feature the Espressif ESP8266 SoC. It also comes with microSD card slot...

An ECG patch with HRV monitoring that's open source, affordable, and Wi-Fi/Bluetooth connected. HeartyPatch is a completely open source, single-lead, ECG-HR wearable patch with HRV (Heart Rate Variability) analysis. It is based on the popular ESP32 system-on-a-chip. By using low-cost,...