3-Phase Brushless DC Sinusoidal Sensorless Fan Motor Driver
MotorTop Stories

3-Phase Brushless DC Sinusoidal Sensorless Fan Motor Driver

Driving a low current 3 phase brushless Sensorless DC motor is very easy with this project. This Full-wave BLDC driver project is capable to drive low current brushless fan motor without a hall sensor. 180° sinusoidal drive, high torque output, and silent drive are a few key features...

Continue Reading
1.186
Views
0 Comments
Portescap Demonstrates Wide Variety of Miniature Medical Motor Technologies
Motor

Portescap Demonstrates Wide Variety of Miniature Medical Motor Technologies

Portescap returns in person to Medical Design & Manufacturing West 2022 for the first time since 2020 to discuss the benefits of its medical motors, which power surgical hand tools, medical pumps, lab automation and ventilation equipment, and several other medical...

Continue Reading
1.151
Views
0 Comments
Infineon Technologies MOTIX™ BLDC TLE956X Motor Control Shield
ArduinoMotor

Infineon Technologies MOTIX™ BLDC TLE956X Motor Control Shield

Infineon Technologies MOTIX™ BLDC TLE956X Motor Control Shield (BLDCSHIELDTLE956XTOBO1) is a demonstration and development platform for the TLE9563-3QX Motor Control System IC. The TLE9563-3QX is a multifunctional system IC with an integrated power supply, communication...

Continue Reading
1.179
Views
0 Comments
Exceptionally high speed and dynamics for AM3248 stepper motor
Motor

Exceptionally high speed and dynamics for AM3248 stepper motor

With its speed and torque, the new AM3248 stepper motor from FAULHABER raises the bar in terms of performance and dimensions. Offering up to 10,000 rpm, it can achieve five times the speed of comparable stepper motors. Combined with a gearhead reduction of 100:1, it supplies a torque of...

Continue Reading
1.192
Views
0 Comments
PWM Temperature Controlled FAN using TC648 and NTC sensor
MotorTop Stories

PWM Temperature Controlled FAN using TC648 and NTC sensor

The project described here is a switch mode fan speed controller for use with brushed or brushless DC motors. Temperature proportional speed control is accomplished using pulse width modulation (PWM). 10K Ohms NTC is used to sense the temperature. The project is built using TC648 chip...

Continue Reading
1.331
Views
0 Comments
Teknic’s ClearCore Controller – Now with Modbus Communication!
Motor

Teknic’s ClearCore Controller – Now with Modbus Communication!

Teknic’s ClearCore, a low-cost, multi-axis, motion and industrial I/O controller, now has Modbus communication. ClearCore provides 4 axes of motion control, Ethernet, serial, USB, and wireless expandability along with 13 configurable digital & analog I/O points. Accelerate your...

Continue Reading
1.384
Views
0 Comments
DC Motor Controller using Relay and MOSFET – Arduino Interface
Motor

DC Motor Controller using Relay and MOSFET – Arduino Interface

The project presented here is a low-cost solution to control high-power brushed DC motor speed and direction. Traditional DC motor controllers are based on solid-state circuitry known as H-Bridge. Here we have made an H-bridge configuration using high current 2 x relays which can handle...

Continue Reading
1.227
Views
0 Comments
Low-Cost DC Motor Direction Controller with Fast Brake using 2 Relays
Motor

Low-Cost DC Motor Direction Controller with Fast Brake using 2 Relays

The project presented here is a low-cost easy to use DC brushed motor direction controller with fast-brake, the project was built using two 12V Relays, 2 x BJT transistors, and 2 x tactile switches. The two LEDs are provided to display the motor direction, 2 tactile switch controls the...

Continue Reading
1.141
Views
0 Comments
Get new posts by email:
Get new posts by email:

Join 97,426 other subscribers

Archives