Libre has released a three flavor board called Tritium. The first board is a 32bit Allwinner H2+ based with 512MB onboard memory and costs only $9. The next one is in the range of $19, and is based around the 32-bit Allwinner H3, has 1GB onboard and is capable of 4K30 output via the...

Electronut Labs recently released their open source Nordic nRF52832 development board that can be used for your next BLE project. This tiny board can be plugged on a breadboard or soldered on a PCB and provides additional value from just using the BLE module directly as it includes...

Over the years FPGAs have become readily available to the maker community. They are now more accessible than ever as many development boards has seen the light. It’s now possible to embed a soft-core MCU into an FPGA  rather than using a hard-core ASIC MCU and here is where PulseRain...

4D Systems, the manufacturer of intelligent graphics solutions, has announced a new 0.9” smart display module as part of the ‘IoD-09’ series. This series is a set of small full-color TFT display modules that feature the Espressif ESP8266 SoC. It also comes with microSD card slot...

An ECG patch with HRV monitoring that's open source, affordable, and Wi-Fi/Bluetooth connected. HeartyPatch is a completely open source, single-lead, ECG-HR wearable patch with HRV (Heart Rate Variability) analysis. It is based on the popular ESP32 system-on-a-chip. By using low-cost,...

REFLO is a stylish, portable reflow oven for creators and makers to easily, quickly, and professionally prototype their IoT device, wearable, small robot, etc. REFLO’s features: Portable at only 6” x 6” x 2” - it’s the worlds smallest reflow oven Efficient as it...

A team of medical and bioengineering undergraduates from McMaster University, Canada have designed a cancer detection device able to detect melanoma. Their design solution, the sKan, is a low cost and non-invasive detection device. Annually, skin cancer accounts for 1 in every 3 cancer...

This project is simple solution to power Arduino Nano from two 1.5V batteries. Circuit converts 2 X AA alkaline battery power into 6V 100mA using boost topology. Circuit uses SOT223-6 pin TLV61046A boost converter IC. The TLV61046A is a highly integrated boost converter designed for...