One of the limiting factors for the computing power of processors is the operating temperature. A research team led by Dr. Wolfram Steller, Dr. Hermann Oppermann, and Dr. Jessika Kleff from the Fraunhofer Institute for Reliability and Microintegration IZM, has developed a new as well as...

danman @ blog.danman.eu build a OLED display NTP clock and document his process on his blog: As a first project with my new ESP32 module with OLED display I chose to build OLED clock. I thought I’ll just find some existing code, upload it and it’s done. There are a few such...

8 Digit serial numerical display shield for Arduino has been designed for various applications like digital clock, stop watch, score display, temperature meter, frequency counter, digital meters etc. The circuit uses popular MAX7219 IC and two common cathode 0.5inch red seven segment...

Henrik Forstén has a nice build log on his newest version of this homemade 6 GHz FMCW radar: Frequency Modulated Continuous Wave (FMCW) radar works by transmitting a chirp which frequency changes linearly with time. This chirp is then radiated with the antenna, reflected from the...

4chord MIDI - the USB MIDI keyboard to play every major hit pop song with four little buttons. by Sven Gregori: 4chord MIDI - the USB MIDI keyboard dedicated to play all the four chord songs, from Adele via Green Day and Red Hot Chilli Peppers to U2 and Weezer. Thanks to MIDI, you can...

Open-Source Miniature Breadboard Friendly ARM Cortex-M4F Dev Board with 1MB Flash, 196kB RAM, 168MHz, floating point and more. 1Bitsy is a debuggable open source STM32F415 development board. Designed for beginners as well as advanced users that want more control over their embedded...

The GnuBee is live on crowdsupply.com. The GnuBee Personal Cloud 2 (GB-PC2) is a network-attached storage (NAS) device specifically engineered to run free, libre, open source software (FLOSS). The GB-PC2 has all the functionality of any commercial, proprietary NAS, but at a much lower...

Arduino Uno home weather station with e-ink display The hardware used for this project is: Waveshare 4.3 e-ink display Arduino Uno Adafruit BME280 combined temperature, humidy and atmospheric pressure DS3231 based hardware clock Arduino Weather Station With E-Ink...