After acquiring CadSoft in June 2016, Autodesk released a new version of EAGLE with new features that improve program functions and a new pricing plan. The new version of Eagle added a modular design blocks feature to the schematic editor that allows you to quickly replicate...

Winstar's WEO012832F is a small OLED display featuring 128x32 pixels in a 0.91 inch diagonal screen, suitable for wearable devices. by Julien Happich @ edn-europe.com: The WEO012832F module comes with a built-in SSD1306BZ controller IC, it supports an I 2C interface and a 14-pin FPC...

"pinko" build a high resolution chronograph which has some great features. Check it out: This is a project is for chronograph that was purposely build for a good friend of mine to be used for accurate measuring of high speed processes. I am using two timers and the chronograph has...

The circuit shown here is a step down converter which can convert an input voltage varying from 8V to 28V to 5V. The circuit is based on TPS54202, which is a 2A synchronous buck converter. This IC has several features such as over-voltage protection and peak current mode...

A custom 12V powerbank for Cube i7 Stylus from Muxtronics: Why would anyone even try to build a power bank – i.e. an external battery for charging mobile devices – these days? These things are commodity, it’s impossible to compete. Right? Well, that is until you find out that...

Edgar implemented capacitive touch sensing using an ATTiny4 to create a touch paddle for Morse code: Like many no-code operators, after being on the air for a while, I developed an interest and appreciation for Morse Code [..] I purchased a cheap paddle, but I found the clicking...

Raspberry Pi has been the household name for many years now, and many other companies have tried to replace it with their offering, but no one sussed to replace Raspberry Pi by performance and low-cost. Though, that might change as ASUS are entering the arena with their 90MB0QY1-M0EAY0...

pinko @ blog.exrockets.com wanted to test some cheap load cells so he decided to build his own load cell amplifier. He writes: Both IA are Rail-to-Rail, single or dual power supply instrumentation amplifiers, however with different standard pin-outs. The gain is set by RG. RR1 and...