Designing and Building a binary clock
Mcu

Designing and Building a binary clock

Parker Dillmann @ macrofab.com has designed a wrist LED binary clock based on PIC16F527 Microchip mcu. The Macro Watch stemmed from those constraints. I picked the PIC16F527 microcontroller by Microchip to be the core of the watch because it was the cheapest MCU I could find that had...

Continue Reading
8.759
Views
0 Comments
LCD clock with 4″ display
LCD/OLED/ePaper

LCD clock with 4″ display

mcs.uwsuper.edu has build a big LCD clock based on MSP430 mcu and DS3231 RTC clock chip. They write: The clock is built on a 4" (101 mm) LCD displays OD-103 manufactured by Orient Display. The LCD provides high contrast of digits and easy reading from a large distance. The unit runs...

Continue Reading
8.809
Views
2 Comments
ATmega Alarm Clock & Thermometer Humidity meter
Mcu

ATmega Alarm Clock & Thermometer Humidity meter

nitram147 @ instructables.com has build a ATmega based alarm clock with temperature and humidity reading. Sensor used is DHT11. First, let me introduce you my project. I made an Alarm clock with extended functionality & thermometer and humiditymeter. Everything started when my...

Continue Reading
5.873
Views
0 Comments
Ovenized crystal oscillator frequency stability
Timer

Ovenized crystal oscillator frequency stability

E. Schrama @ ejo60.wordpress.com uses an Arduino and a DCF77 time signal receiver to test the stability of an ovenized crystal oscillator running at 1 MHz. In this experiment I will use an Arduino and a DCF77 time signal radio receiver to measure the stability of an ovenized crystal...

Continue Reading
5.001
Views
0 Comments
Arduino LED Wall clock using WS2811
Arduino

Arduino LED Wall clock using WS2811

This is a big LED digit wall clock based on Arduino and WS2811. Features : big digits ( each digit is approximately the size of a A4 paper). slim in order to fit in a photo frame (a big one). auto dim the light depending on the light in the room. dedicated DST...

Continue Reading
12.089
Views
0 Comments
Arduino Watch Sport
Arduino

Arduino Watch Sport

by Alexis Ospitia @ instructables.com: In today's technology, especially electronics have come a long way, to the point that today can make projects a few years ago were very complicated to implement, thanks to these technological advances are now able to design and implement our...

Continue Reading
6.225
Views
0 Comments
ESP8266-based touchscreen clock and light controller with WiFi
Mcu

ESP8266-based touchscreen clock and light controller with WiFi

Spiros Papadimitriou build a nice clock based on ESP8266 Wifi and 2.4" LCD module. He writes: This was a week-long hack, to build a simple touchscreen clock, with the following features: Graphical UI with touch (no buttons) Clock synchronization over NTP Ability to control...

Continue Reading
8.186
Views
0 Comments
The Pendulum Clock
Mcu

The Pendulum Clock

by Dylan Rush : If you've ever rode the Link Light Rail in Seattle to the airport, you may have glanced out of the window while traveling through a tunnel and seen playing cards illuminated on the walls. These images are not made from two dimensional screens. Each display is just a...

Continue Reading
3.359
Views
0 Comments
Get new posts by email:
Get new posts by email:

Join 97,426 other subscribers

Archives