Tag: PWM

The Mini Infra-Red Remote Robot Controller shield for Arduino Nano is designed to drive mini mobile robots. Low voltage DC Motor controller interface allows Infrared wireless control of two DC motors, two PWM and 2 Direction signal outputs to drive two motors separately. TB6612 IC is...

This is my second project for LED Driver based on CAT4101 IC. The first project was for single White LED. This project has been designed to drive 3 channels of RGB LEDs with PWM signal which helps to create multi-color LED light. Arduino Nano is used to generate PWM signals for RGB LEDs...

A dual-channel step-down LED driver, the LT3964 from Linear Technology packs 40 V, 1.6 A power switches and an I2C interface for dimming control. [via] Operating over an input voltage range of 4 V to 36 V, the driver integrates two independently controlled LED drivers that switch at...

10 Amp 400V DC Intelligent power module board has been designed using ON Semiconductors STK544UC62K. This Inverter IPM module includes the output stage of a 3-phase inverter, pre-drive circuits, bootstrap circuits, protection circuits, op-amp based current sense circuit, comparator...

This project made using MC3PHAC from NXP Semiconductor. The project generates 6 PWM signals for 3 Phase AC Motor controller. It’s very easy to make professional VFD combining with Intelligent Power Module (IPM) or 3 Phase IGBT/MOSFET with Gate driver. The board provides 6 PWM signals...

In this technical tutorial Kolban Technical Tutorials start to look a Pulse Width Modulation with the ESP32 for dimming LEDs and for controlling a servo. ESP32 and Pulse Width Modulation -...

Iolinker is a cheap 64 FPGA board with a MachXO FPGA that functions as a dynamically configurable IO matrix. Its main functionality, besides IO extension, is to dynamically set up a matrix of GPIO connections, that allow direct pass-through of high-frequency signals. Circuits can thereby...

pinko @ blog.exrockets.com wanted to regulate the power to a resistive load so he decided to build a PWM power regulator based on PIC18LF2550. In order to synthesize chlorates and perchlorates in the home lab it is always good to have a way to regulate the current flowing through the...