DIY GPS Tracker Features Three Arduino boards
ArduinoGPS

DIY GPS Tracker Features Three Arduino boards

Duane Bester has built a GPS Tracker From Scratch Using 3 Arduino boards to make a GPS tracker and a data logger. A flash of idea came to him, to combine the new Arduino Nano 33 BLE Sense with an SD card and GPS module for a project that records GPS and IMU data. So he opted to buy the...

Continue Reading
3.984
Views
0 Comments
“Connect” to an atomic clock in space! GPS, DCF77
GPSTimer

“Connect” to an atomic clock in space! GPS, DCF77

This project is a clock with radio receivers that can receive the exact time from the GPS satellites or from the DCF77 transmitter. by hkdcsf @ hackaday.io This project is a clock with radio receivers which can receive the exact date and time from the DCF77 time signal transmitter or...

Continue Reading
3.310
Views
0 Comments
SparkFun Launches a High-Precision Dead Reckoning GPS/GNSS Board with RTK support
GPSRaspberry Pi

SparkFun Launches a High-Precision Dead Reckoning GPS/GNSS Board with RTK support

SparkFun has created several Real-Time Kinematics (RTK) as well as dead reckoning boards in the past, but this new ZED-F9R GPS piHAT from the Colorado-based manufacturer is the very first high-precision sensor fusion board to combine both the RTK and dead reckoning features in one...

Continue Reading
2.392
Views
0 Comments
GNSS Modules: Elara and Erinome
GPS

GNSS Modules: Elara and Erinome

Würth Elektronik’s GNSS modules are available in UART and I²C interfaces Würth Elektronik's GNSS modules, Elara and Erinome series, are suitable for different application areas, such as tracking and navigation devices, container localization, fleet management or autonomous...

Continue Reading
2.529
Views
0 Comments
SBG Systems Ellipse-D Miniature Dual GPS INS
GPS

SBG Systems Ellipse-D Miniature Dual GPS INS

Ellipse-D is the smallest Inertial Navigation System (INS) integrating a Dual-antenna, multi-band GNSS receiver, capable of delivering precise heading as well as centimeter-level position accuracy in the most challenging GNSS conditions. It provides attitude, heading, heave as well as...

Continue Reading
4.505
Views
0 Comments
Skytraq Launches Tiny PX1122R Multi-Band RTK GNSS Module, Enabling Centimeter Accuracy
GPSTop Stories

Skytraq Launches Tiny PX1122R Multi-Band RTK GNSS Module, Enabling Centimeter Accuracy

A couple of years ago Skytraq launched the NavSpark mini, a tiny (17x17mm) GPS module, that sold for $6. However, the company has now launched an even smaller module called Skytraq PX1122R, which  measures at just 16x12mm, and offers support for GPS, Galileo, GLONASS, and Beidou...

Continue Reading
4.640
Views
0 Comments
Small multi-band GNSS receiver with 1-cm position accuracy
GPS

Small multi-band GNSS receiver with 1-cm position accuracy

SkyTraq announced a 12- x 16-mm size PX1122R multi-band RTK receiver for centimeter-level accuracy GNSS positioning applications. The receiver works with all the four global navigation satellite systems using GPS L1/L2C, Galileo E1/E5b, GLONASS L1/L2, and Beidou B1I/B2I signals...

Continue Reading
4.526
Views
0 Comments
A LoRaWAN Theft Recovery System for Stolen Bikes using a Low-Cost Dragino LGT-92
GPS

A LoRaWAN Theft Recovery System for Stolen Bikes using a Low-Cost Dragino LGT-92

Simon Kemper has published a guide for making use of the low-cost Dragino LGT-92 LoRaWAN asset tracking system to help track a bike when it’s stolen for easy recovery, while running for years on a single battery. Dragino LGT-92 is built for asset tracking across a LoRaWAN connection...

Continue Reading
4.095
Views
0 Comments
Get new posts by email:
Get new posts by email:

Join 97,426 other subscribers

Archives