ArduCam KingKong – An RPi CM4-Based AI Edge Camera That Combines OAK-SoM
Raspberry Pi

ArduCam KingKong – An RPi CM4-Based AI Edge Camera That Combines OAK-SoM

Arducam has recently announced the ArduCam KingKong a Raspberry Pi CM4-based Smart Edge AI camera based on Luxonis OAK-SoM all housed in a compact metal casee. This camera module is similar to the Raspberry Pi 5-powered Arducam PiINSIGHT camera which we've written about in a previous...

Continue Reading
1.075
Views
0 Comments
The SparkFun LTE Stick is A Development Platform for the u-blox LARA-R6 LTE Module
IoT

The SparkFun LTE Stick is A Development Platform for the u-blox LARA-R6 LTE Module

SparkFun has introduced the SparkFun LTE Stick - LARA-R6, a compact LTE development board with u-blox LARA-R6 LTE Cat 1 module. Designed for North America, it supports data and voice with major networks like AT&T, Verizon, T-Mobile, and FirstNet, and includes a nanoSIM card slot for...

Continue Reading
1.115
Views
0 Comments
Melexis squeezes ultimate performance in a tiny 3D Magnetometer
Sensor

Melexis squeezes ultimate performance in a tiny 3D Magnetometer

Melexis announces the MLX90394 Triaxis® micropower magnetometer, a tiny Hall-effect based sensor. It perfectly balances the design trade-off between low noise, current consumption and cost. With on-the-fly selectable modes and advanced configurability, it enables high reuse and fast...

Continue Reading
1.092
Views
0 Comments
Orbbec releases Persee N1 camera-computer kit for 3D vision enthusiasts, powered by the NVIDIA Jetson platform
AI

Orbbec releases Persee N1 camera-computer kit for 3D vision enthusiasts, powered by the NVIDIA Jetson platform

Orbbec’s feature-rich RGB-D camera-computer is a ready-to-use out-of-the box solution for 3D vision application developers and experimenters Orbbec, an industry leader dedicated to 3D vision systems, has developed the Persee N1, an all-in-one combination of a popular stereo-vision 3D...

Continue Reading
1.059
Views
0 Comments
EDATEC’s AI-Enabled Vision System is Powered By RPi CM4
Raspberry Pi

EDATEC’s AI-Enabled Vision System is Powered By RPi CM4

The ED-AIC2100 and ED-AIC2000 are two new AI camera modules powered by the RPi CM4, and designed for industrial and commercial applications. These camera systems are equipped with the Broadcom BCM2711 CPU and offer storage options of 8GB, 16GB, or 32GB eMMC. They feature a...

Continue Reading
1.121
Views
0 Comments
Forlinx Embedded Partners with StarFive to Unveil RISC-V Powered FET7110-C SoM
SoM-CoM

Forlinx Embedded Partners with StarFive to Unveil RISC-V Powered FET7110-C SoM

Forlinx Embedded recently unveiled its newest System-on-Module (SOM) featuring the StarFive JH7110 RISC-V processor. Built on the innovative Jinghong 7110 architecture from StarFive, this versatile SOM, along with its compatible carrier board, is tailored for a wide range of...

Continue Reading
1.086
Views
0 Comments
DC Motor Control Using Joystick

DC Motor Control Using Joystick

This is a compact, low-profile, and high-performance DC motor driver that provides easy control of a DC motor using a joystick. This small-size board can drive small to medium-sized brushed DC motors with up to 2.5A continuous and 6A peak currents. It is an Arduino-compatible project...

Continue Reading
293 Views0 Comments
MangoPi to Release First RISC-V Router with Dual GbE Support
IoTTop Stories

MangoPi to Release First RISC-V Router with Dual GbE Support

In an attempt to revolutionize the router industry, MangoPi launches one of its first RISC-V-based Router Boards with ArtInChip D213ECV 64-bit RISC-V processor, 28 MB DDR3 RAM, 256MB SPI NAND flash. Prices at US $39.14, this little 5 x 5cm device could be a game changer. Measuring just...

Continue Reading
1.255
Views
0 Comments
Get new posts by email:
Get new posts by email:

Join 97,426 other subscribers

Archives